Schema Disable Body
Schema Disable Post
Unit Number
1067042
Model
N/A
Serial Number
129074
Year
2014
Hours
10
City
PASCO
State
WA
Country
US
Rating
FAIR
Availability
Available
Status Code
2
Status
Used
Price
620000
Equipment Type
equipment
Branch Name
REMARKETING

General Appearance

Cleaning Required
Yes
Covers
Poor - DOOR AND COVER ON HYDRAULIC TANK ARE BROKEN. COVER FOR LOWER PULLEY RUBBED THROUGH.
Engine Compartment
Good
Paint
Good - PAINT HAS CUTS,SCUFFS AND RUST
Decal Appearance
Good - DECALS ARE LEDGIBLE.

Engine

Oil Level
Poor - PONY MOTOR OIL IS OVER FULL. OIL SMELLS LIKE GAS.
Starter
Poor - BATTERY IS DEAD.
Air Filter
Poor - AIR FILTER NEEDS CLEANED
Leaks?
No

Electrical, Starting And Charging System

Error Codes
No - UNABLE TO CHECK FOR ERROR CODES DURING INSPECTION
Start / Stop System
Fair - ALL BUTTONS AND SWITCHES EXCEPT LOWER CONVEYOR SWITCH MOVE FREELY. ALL LABELING IS LEGIBLE. UNABLE TO TEST DURING INSPECTION.
Wiring
Good - WIRING SHOWS NO DAMAGE. UNABLE TO TEST DURING INSPECTION.
Motion Alarm
Good - UNABLE TO CHECK START ALARM DURING INSPECTION.
Gauges
Good - GAUGES SHOW NO DAMAGE .UNABLE TO TEST DURING INSPECTION.

Chipper / Feed System

Feed Hopper
Fair - HOPPER IS IN GOOD CONDITION. HOPPER PLATE IS RUBBED THROUGH.
Hopper Wings
Good - HOPPER WINGS ARE IN GOOD CONDITION,

Shaker Head

Notes
UNABLE TO TEST OPERATION OF SHAKER BOX DURING INSPECTION.
Shaker Mounting
Good - SPRINGS HAVE NO LOOSE HARDWARE. UNABLE TO TEST DURING INSPECTION
Shaker Gear Box
Good - GEAR BOX HAS NO LEAKS. FLUID LEVEL WAS FULL IN SIGHT GLASS.
Side Plates
Poor - MISSING ADJUSTER BOLTS ON BOTH SIDES OF SHAKER BOX.

Hydraulics

Oil Leaks?
No
Pump
Good - PUMP SHOWS NO DAMAGE. NO LEAKS FOUND DURING INSPECTION TO TEST DURING INSPECTION.
Oil Levels
Poor - OIL LEVEL WAS FULL ON BOTH TANKS. FOUND THAT ACCESS DOOR ON LEFT SIDE TANK OF UNIT WAS OPEN. OIL COULD BE CONTAMINATED . WOULD HAVE TO FLUSH TANK AND CHANGE FILTER.
Filter
Poor - OIL COULD BE CONTAMINATED WOULD HAVE TO CHANGE FILTER
Tilt Cylinder
Good
Controls
Good - CONTROLS SHOW NO DAMAGE OR LEAKS. UNABLE TO TEST DURING INSPECTION.
Motor
Good - MOTOR SHOWS NO DAMAGE.UNABLE TO TEST DURING INSPECTION.
Conveyor Cylinders
Good - NO LEAKS FOUND DURING INSPECTION. ALL HARDWARE IS TIGHT. UNABLE TO TEST DURING INSPECTION.

Conveyors

Feed Conveyor Frame/Bed
Good
Feed Conveyor Pulleys
Good
Lift Conveyor Belt
Good
Main Conveyor Pulleys
Poor - LOWER PULLEY IS BENT,TWISTED AND RIPPED. MISSING BEARING FOR PULLEY. MISSING PILLOW BLOCK.
Main Conveyor Frame/Bed
Good - FOUND NO APPARENT CRACKS IN FRAME.
Feed Conveyor Rollers
Good
Lift Conveyor Frame/Bed
Good
Main Conveyor Belt
Poor - BELT IS BROKEN.
Feed Conveyor Belt
Fair - BELT HAS CUT IN CENTER AND ROCK STUCK IN BELT.
Lift Conveyor Rollers
Poor - ROLLERS ARE MISSING. ROLLER FRAME IS BENT.MISSING SECTION ON RUBBER SUPPORT ROLLER
Main Conveyor Rollers
Poor - ROLLER BROKE FREE FROM ATTACHMENT POINT.
2 Side Conveyor Frame/Bed
Good
2 Side Conveyor Belt
Good
1 Side Conveyor Rollers
Poor - TWO CENTER ROLLERS HAVE DAMAGE.
1 Side Conveyor Frame/Bed
Good
1 Side Conveyor Pulleys
Good
Lift Conveyor Pulleys
Poor - PULLEY GEAR BOX SEEPING FROM BREATHER.
1 Side Conveyor Belt
Poor - BELT HAS MULTIPLE REPAIRS.
2 Side Conveyor Rollers
Good
2 Side Conveyor Pulleys
Good

Chassis

Cracks
Yes - TAG AXLE GUARD IS BENT AND HAS A CRACK IN WELD.CROSS SUPPORT BENT AND TWISTED. GUARD FOR LOWER PULLEY BENT AND TWISTED.
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.