The TH514 Telehandler is designed for your toughest jobsite applications. With load capacity of 4990 kg (11,000 lb) and lift height of 13.7 m (45 ft), this telehandler will do the work of many.
|Rated Load Capacity||11000 lb (499 kg)|
|Maximum Lift Height||45 ft (13700 mm)|
|Load at Max Height - Stabilizers Down||7000 lb (3175 kg)|
|Load at Max Height - Stabilizers Up||4000 lb (1814 kg)|
|Maximum Forward Reach||30.27 ft (9225 mm)|
|Load at Max Reach - Stabilizers Down||3000 lb (1361 kg)|
|Load at Max Reach - Stabilizers Up||1000 lb (454 kg)|
|Top Travel Speed||20 mph (32 km/h)|
|Load at Max Height||7000 lb (3175 kg)|
|Load at Max Reach||3000 lb (1361 kg)|
|Load at Maximum Height||7000 lb (3175 kg)|
|Load at Maximum Reach||3000 lb (1361 kg)|
|Engine Model||Cat C4.4 DITAAC|
|Gross Power||101 hp (74.5 kW)|
|Maximum Torque||302.4 lb ft (410 N·m)|
|Bore||4.13 in (105 mm)|
|Stroke||5 in (127 mm)|
|Displacement||268.5 in3 (4.4 L)|
|Operating Weight||23772 lb (10760 kg)|
|Height||8.63 ft (2630 mm)|
|Width||8 ft (2440 mm)|
|Wheelbase||10.5 ft (3200 mm)|
|Length to Fork Face||21.39 ft (6520 mm)|
|Ground Clearance||15.79 in (401 mm)|
|Turning Radius over Tires||12.86 ft (3920 mm)|
|Turning Radius over Forks||18.27 ft (5570 mm)|
|Length to Front of Tire||16.7 ft (5091 mm)|
|Rear Overhang||4.02 ft (1225 mm)|
|Standard||14.00-24 16PR TG-02 Mitas|
|Optional Construction||14.00 - 24 SGG Goodyear|
|Maximum System Pressure||3625.94 psi (250 bar)|
|Pump Type||Variable displacement load sensing axial piston pump|
|Primary System Max Pressure||3625.94 psi (250 bar)|
|Primary System Max Pump Flow||39.63 gal/min (150 L/min)|
|Auxiliary hydraulic supply - Intermittent||21.13 gal/min (80 L/min)|
|Auxiliary hydraulic supply - Continuous||15.85 gal/min (60 L/min)|
|Fuel Tank||39.63 gal (150 L)|
|Hydraulic Tank||23.78 gal (90 L)|
|Forward - 1||4.35 mph (7 km/h)|
|Forward - 2||7.46 mph (12 km/h)|
|Forward - 3||13.05 mph (21 km/h)|
|Forward - 4||19.88 mph (32 km/h)|
|Reverse - 1||4.35 mph (7 km/h)|
|Reverse - 2||7.46 mph (12 km/h)|
|Reverse - 3||13.05 mph (21 km/h)|
|Boom Up||17 Seconds (17 Seconds)|
|Boom Down||10 Seconds (10 Seconds)|
|Tele In||20 Seconds (20 Seconds)|
|Tele Out||17.5 Seconds (17.5 Seconds)|
|Crowd Forward (dump)||4 Seconds (4 Seconds)|
|Crowd Backward||3 Seconds (3 Seconds)|
|Combined - Up and Out||28 Seconds (28 Seconds)|
|Combined - Down and In||19 Seconds (19 Seconds)|
|Boom Breakout Force||14162.96 lb (63 kN)|
|Bucket Breakout Force||21356.85 lb (95 kN)|
|Drawbar Pull (Basic)||19783.18 lb (88 kN)|
The operator station provides comfort and protection with improved job site visibility and convenient, easier to use controls.
Our easier to use control layout and single joystick will keep you fresh and comfortable all day.
Cab entry and exit is both easier and more convenient with its well placed handholds and step.
The machine provides full operator security with EROPS protection.
Ease of operation was extremely important in the design of the TH514 Telehandler. The single lever joystick with roller switches is designed to maximize operator efficiency.
The joystick allows three simultaneous boom functions enabling application customization.
Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.
The TH514 delivers high performance to meet your specific job site needs.
The TH514 can pick and place bricks and materials to a maximum height of 13.7 m (45 ft).
The TH514 Telehandler offers three steering modes to allow you to more easily position the machine.
Caterpillar componentry, including a Cat C4.4 DITAAC mechanical control engine give you the quality power train that you expect from a Cat machine.
The TH514 has a 4-speed powersynchro transmission, which uses a torque converter to transfer engine power to the transmission.
The TH514 is as versatile as your toughest job demands.
A manual IT interface is standard on the TH514 Telehandler. For optimum versatility, an optional hydraulic quick coupler is available, allowing the operator to change non-hydraulic work tools without leaving the cab.
Machine is equipped with a selectable continuous auxiliary hydraulic flow allowing the use of hydraulically operated work tools.
A wide range of work tools are available to meet most job site applications. Telehandler work tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value. Contact your Cat dealer for available work tool options.
Various machine configurations are available to match the different applications and operating environments.
Two tire options are available to enable the machine to be configured to achieve its optimum job site performance.
With a platform size of 8 ft x 4 ft, it is designed for ease of transport. Platform has a maximum capacity of 1,000 lbs and is designed with multiple lanyard anchor points.
Extended service intervals and a reduction in routine daily maintenance enables you to spend your time on the job.
All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are accessible and major components are at ground level due to the overall machine design.
Improving operating techniques can boost your profits. Your Cat Dealer has literature and other tools to help increase your productivity.
You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime.