Power Rating

Minimum Power
335 bhp
Maximum Power
456 bhp
Rated Speed
1800-2200 rpm

Emission Standards

U.S. EPA Tier 4 Final Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.


Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
115 mm (4.53 in)
149 mm (5.87 in)
9.3 L (567.5 in³)
Turbocharged-Aftercooled (TA)
Compression Ratio
Combustion System
Direct Injection
Rotation (from flywheel end)
Cooling System Capacity
22 L (23.6 qts)
Lube System (refill)
30 L (31.7 qts)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

1125 mm (44.3 in)
791 mm (31.1 in)
1068 mm (42 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
865 kg (1907 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

925 mm (36.4 in)
694 mm (27.3 in)
432 mm (17.0 in)
96 kg (211 lb)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • Available SAE 1 power take-off with optional SAE A, SAE B, SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Proposed Stage V)
  • Fuel System
    • Electronic high pressure common rail
    • Primary fuel filter
    • Secondary and tertiary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system)
  • Power Take Off (PTO)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
    • Vibration damper
    • Lifting eyes
  • Tier 4 Final, Proposed Stage V Aftertreatment
    • Clean Emissions Module (CEM) consisting of Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and high-efficiency Selective Catalytic Reduction (SCR)
    • Pump Electronic Control Unit (PETU)
    • Available in 12V or 24V systems
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.