Power Rating

Minimum Power
202.0 bhp
Maximum Power
275.0 bhp
Rated Speed
1800-2200 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage IV

General

Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
105 mm (4.13 in)
Stroke
135 mm (5.3 in)
Displacement
7.01 L (427.7 in³)
Aspiration
Series Turbocharged Aftercooled (TTA)
Compression Ratio
16.5:1
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
15.2 L (16 qt)
Lube System (refill)
13-16 L (13.7-16.9 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1461 mm (57.5 in)
Width
1769 mm (69.6 in)
Height
916 mm (36.1 in)
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
1000 kg (2204 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Diameter
287-337.8 mm (11.3-13.3 in)
Width
714.4 mm (28.1 in)
Height
618.5-643.9 mm (24.3-25.3 in)
Weight
124-134 kg (273.4-295.4 lb)
  • Air Inlet
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • ACERT Technology
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility
  • U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.