Power Rating

Minimum Rating
81.8 bhp
Maximum Rating
108.6 bhp
Rated Speed
2200 rpm

Emission Standards

Emissions
U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
105 mm (4.1 in)
Stroke
127 mm (5.0 in)
Displacement
4.4 L (268.5 in³)
Aspiration
Turbocharged (T)
Compression Ratio
18.2:1
Combustion System
Direct Injection
Rotation (from flywheel end)
Counterclockwise

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1260 mm (49.6 in)
Width
734 mm (28.9 in)
Height
964 mm (38 in)
Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
465 kg (1025 lb)
  • Air Inlet System
    • Mounted air filter and turbocharger
  • Control System
    • Available in 12 volt or 24 volt systems
    • Starter motor 12V or 24V
  • Cooling System
    • Fan (pusher or puller)
    • Fan drive
    • Radiator
    • Water pump
  • Flywheels and Flywheel Housing
    • Flywheel
    • SAE No. 3 flywheel housing
  • Fuel System
    • Fuel filter
  • Lube System
    • Oil cooler
    • Lube oil filter
    • Timing case oil filler
  • Mountings
    • Engine mounting brackets
  • Power Take Off (PTO)
    • SAE A or SAE B front PTO (142/280 NŸM)
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.