Power Rating

Minimum Power
100.0 bhp
Maximum Power
173.5 bhp
Rated Speed
2200 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final, EU Stage IV

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
105 mm (4.1 in)
Stroke
127 mm (5.0 in)
Displacement
4.4 L (268.5 in³)
Aspiration
Turbocharged Aftercooled (TA) or Twin Turbocharged Aftercooled (TTA)
Compression Ratio
16:2
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
9-9.4 L (8.2-8.5 qt)
Lube System (refill)
5.2-13.5 L (5.5-14.27 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
1433 mm (56.4 in)
Width
795-820 mm (31.3-32.3 in)
Height
1126-1150 mm (44.3-45.3 in)
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
670-700 kg (1477-1543 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Diameter
244.9-270.3 mm (9.6-10.6 in)
Width
365-695 mm (14.3-27.4 in)
Height
279-430 mm (11-16.9 in)
Weight
34-80 kg (75-176.4 lb)
  • Air Inlet System
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 2 and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • ACERT Technology
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
    • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
  • General
    • Available with or without a balancer
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment / Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC) / Selective Catalytic Reduction (SCR)
    • Diesel Particulate Filter (DPF) / Selective Catalytic Reduction (SCR)
  • U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • No ash service requirement
    • Passive regeneration
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.