Power Rating

Minimum Power
74 bhp
Maximum Power
74 bhp
Rated Speed
2200-2500 rpm

Emission Standards

U.S. EPA Tier 3 Nonroad Equivalent Emission Standards (Not Currently EPA Certified). EU Stage IIIA Nonroad Equivalent Emission Standards (Non-Current for EU)


Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
90 mm (3.5 in)
110 mm (4.3 in)
2.8 L (171 in³)
Turbocharged (T) and Turbocharged Aftercooled (TA)
Compression Ratio
Combustion System
Direct Injection
Rotation (from flywheel end)
Lube System (refill)
4 L (1.06 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length (rear of flywheel housing to front of fan pulley)
635 mm (25 in)
561 mm (22.1 in)
766 mm (30.2 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments)
245 kg (450 lb)
  • Air Inlet System
    • Induction manifolds
    • Exhaust manifolds
  • Control System
    • Starter motor (12V or 24V)
    • Alternator (12V or 24V)
    • Electronic Control Unit (chassis mounted)
    • Engine control sensors and robust wiring harness
    • Data interface via CANbus J1939
  • Flywheels and Flywheel Housing
    • Flywheel housings – SAE 3 or SAE 4
    • Choice of flywheel to match industry common hydraulic pumps and transmissions
    • Side PTO with SAE A or SAE B interface
  • Fuel System
    • Fuel filter – preconnected but chassis mounted
    • With water sensor
  • Lube System
    • Lubricating oil filters
    • High incline oil pan – 35° continuous in all directions
  • General
    • Cold start capability to -20° C (-4° F) with standard equipment
    • Paint: Caterpillar yellow, with optional colors available at request
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.