Power Rating

Minimum Power
19.3 bhp
Maximum Power
26.4 bhp
Rated Speed
3000 rpm

Emission Standards

Emissions
14.4-18.4 bkW (19-24.7 bhp) meet U.S. EPA Tier 4 Final. Other ratings available for Europe and other regions.

General

Engine Configuration
Inline 3, 4-Stroke-Cycle Diesel
Bore
77 mm (3.03 in)
Stroke
81 mm (3.19 in)
Displacement
1.131 L (69 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23:1
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
5.21 L (5.5 qt)
Lube System (refill)
4.9 L (5.2 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length
778 mm (30.6 in)
Width
438 mm (17.2 in)
Height
730 mm (28.7 in)
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)
129 kg (284 lb)
  • Air Inlet System
    • Inlet manifold
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Mounted radiator and fan
  • Flywheel and Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • SAE No. 5 flywheel housing
    • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
  • Fuel System
    • Fuel injection pump
    • Fuel filter
  • Lube System
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • Power Take Off (PTO)
    • Provision for timing case rear facing PTO
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.