Power Rating

Minimum Power
11.8 bhp
Maximum Power
20.5 bhp
Rated Speed
2200-3600 rpm

Emission Standards

Emissions
U.S. EPA Tier 4 Final. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.

General

Engine Configuration
In-Line 3, 4-Stroke-Cycle Diesel
Bore
67 mm (2.64 in)
Stroke
72 mm (2.83 in)
Displacement
0.76 L (46.5 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23.5:1
Combustion System
Indirect Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
1.2 L (1.27 qt)
Lube System (refill)
2.35-3.05 L (2.48-3.22 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
480 mm (18.9 in)
Width
371 mm (14.6 in)
Height
528 mm (20.8 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
71 kg (156.6 lb)
  • Air Inlet
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel and Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.