Power Rating

Minimum Power
11.0 bhp
Maximum Power
13.7 bhp
Rated Speed
2000-3600 rpm

Emission Standards

Emissions
For Use in Regions Where Less Than 19 kW Ratings Are Not Required to Meet an Emission Standard

General

Engine Configuration
In-Line 2, 4-Stroke-Cycle
Bore
67 mm (2.64 in)
Stroke
72 mm (2.83 in)
Displacement
0.5 L (31 in³)
Aspiration
Naturally Aspirated (NA)
Compression Ratio
23.5:1
Combustion System
Indirect Injection
Rotation (from flywheel end)
Counterclockwise
Cooling System Capacity
1.1 L (1.16 qt)
Lube System (refill)
1.6-2.0 L (1.7-2.1 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length
407 mm (16 in)
Width
371 mm (14.6 in)
Height
523 mm (20.6 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)
57 kg (126 lb)
  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 14 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
    • Choice of cooling fans
  • Flywheel and Flywheel Housing
    • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
    • Electronic Shut-off Solenoid (ESOS)
  • Lube System
    • Closed circuit breather
    • Spin-on lube oil filter
    • Lube oil pressure switch
    • Lube oil sump
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Gradeability 35° continuous
    • Paint: Caterpillar yellow, with optional colors available at request
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.