Power Rating

Minimum Power
790.0 bhp
Minimum Power
790 BHP
Maximum Power
1035.0 bhp
Maximum Power
1035 BHP
Frequency
1200-1400 rpm

General

Bore
170 mm (6.7 in)
Bore
170 mm (6.7 in)
Stroke
190 mm (7.5 in)
Stroke
190 mm (7.5 in)
Displacement
51.8 L (3158 in³)
Displacement
51.8 L (3158 in³)
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous
Aspiration
Turbocharged Aftercooled (TA)
Engine Configuration
Engine - Continuous

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Height
2136 mm (84.1 in)
Width
2220 mm (87.4 in)
Length
3023 mm (119 in)

Engine Dimensions - Approximate

Weight - Net Dry
4950 kg (10913 lb)
Width
2220 mm (87.4 in)
Height
2136 mm (84.1 in)
Length
3023 mm (119 in)
  • Air Inlet System
    • Axial flow air cleaner
    • Cleanable
    • Single element canister type with service indicator
  • Control System
    • ADEM A3 with integrated electronic throttle control
    • CSA certified
  • Cooling System
    • Two-stage charge air cooling
    • Thermostats and housing
    • Gear-driven jacket and aftercooler water pump
    • Stainless steel aftercooler cores
  • Exhaust System
    • Dry exhaust manifolds
    • Exhaust outlet: 200 mm I.D.
  • Flywheels and Flywheel Housings
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • 7-50 psi gas supply
    • Electronic fuel metering valve
    • Gas pressure regulator, pivot valve operated
  • Ignition System
    • ADEM A3
    • Outdoor CSA certified
  • Lubrication System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan
    • Oil sampling valve
    • Turbo oil accumulator
  • Power Take-Offs
    • Front housing — two-sided
    • Front lower — LH accessory drive
  • Torsional Vibration Analysis
    • Provided through Caterpillar
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and guard
  • Air Inlet System
    • Round air inlet adaptors
  • Charging System
    • Battery chargers
    • CSA certified version available with
  • Cooling System
    • Mechanical joint assembly connections
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
  • Fuel System
    • Gas filter
  • Instrumentation
    • Advisor display panel
    • Communications module
  • Lubrication System
    • Lubricating oil
    • Oil bypass filter
    • Air prelube pump
  • Power Take-Offs
    • Front stub shaft
    • Pulleys
  • General
    • Special paint
  • EU Certification
    • EEC DOI certification
  • Support
    • Factory commissioning
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.