Engine

Engine Model
Cat® C7.1 ACERT™
Engine Power (Maximum) – ISO 14396
221 hp
Engine Power (Maximum) – ISO 14396 (DIN)
224 hp
Net Power (Rated) – ISO 9249/SAE J1349
193 hp
Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
196 hp
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Bore
4.13 in
Stroke
5.31 in
Displacement
427.8 in3

Undercarriage

Track Gauge
72.8 in
Track on Ground
100 in
Track Shoe Type
Double Grouser
Track Shoe Width – Standard
21.6 in
Track Shoe Width – Optional
17.7 in
Ground Contact Area – Standard Shoe
4340 in2
Ground Contact Area – Optional Shoe
3565 in2
Ground Pressure – Standard Shoe
10.3 psi
Ground Pressure – Optional Shoe
12.4 psi
Track Rollers – Each Side
7
Number of Shoes – Each Side
38
Grouser Height – Double Grouser
1.65 in

Service Refill Capacities

Fuel Tank
84.5 gal
Cooling System
8.45 gal
Crankcase (with filter)
4.4 gal
Final Drives (each)
4 gal
Hydraulic Tank
23.7 gal
Pivot Shaft
0.5 gal
DEF Tank
4.22 gal

Weights

Operating Weight
46518 lb

Buckets

Capacity - General Purpose Landfill
4.05 yd3
Capacity – General Purpose
3.2 yd3
Capacity – Landfill
4.05 yd3
Capacity – Multi-Purpose
2.48 yd3
Capacity – Performance Series
3.66 yd3
Bucket Width – Landfill
102.8 in
Bucket Width – General Purpose
102.8 in
Bucket Width – Performance Series
106.8 in
Bucket Width – Multi-Purpose
101.3 in

Ripper Specifications

Type
Radial
Number of Pockets
3
Overall Width/Beam
76.7 in
Penetration
11.6 in
Ripping Width
72.3 in
Shank Cross Section
58.5 mm × 138 mm (50 in × 5.4 in)
Ground Clearance
23.4 in
Cylinders – Bore
4.5 in
Cylinders – Stroke
11.3 in
Added Machine Length with Ripper in Transport Position
24.0 in

Drive System

Track Motor
Two, variable displacement, bent axis motors
Drive System
Hydrostatic drive with infinite machine speeds to 10.0 km/h (6.2 mph)
Drive Pump
Two, variable displacement, slipper-type axial piston pumps
Relief Valve Setting
6890 psi

Bucket Cycle Times

Lift
5.5 seconds
Power Down
3.7 seconds
Float Down
2.0 seconds
Dump at Maximum Height (from full rackback)
1.3 seconds
Rackback at Maximum Height (from full dump)
1.4 seconds

Hydraulic System – Equipment

Type
Closed center, load sensing piston
Output
60.8 gal/min
Main Relief Valve Setting
3989 psi

Standards

ROPS
Meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994 DLV criteria SAE J397B, ISO 3164:1995
FOPS
Meets SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II DLV criteria SAE J397B, ISO 3164:1995
Brakes
Meet SAE J/ISO 10265 MAR99 ISO 10265:1998
Cab
Declared dynamic operator sound pressure level is 73 dB(A) when “ISO 6396:2008” is used to measure value for enclosed cab
Cab
Hearing protection is recommended when operating with an open operator station and cab
Cab
Declared exterior sound power level is 108 dB(A) when value is measured according to “ISO 6395:2008”
Cab
The labeled sound power level is 111 dB(A) measured according to the test procedure and conditions specified in 2000/14/EC.

Dimensions (Approximate)

Overall Machine Width without Bucket: With Standard Tracks – 550 mm (21.6 in) Shoes
94.5 in
Overall Machine Width without Bucket: With Narrow Tracks – 450 mm (17.7 in) Shoes
90.5 in
Ground Clearance
18.5 in
Machine Height to Top of Cab
130.9 in
Length to Front of Track
197.0 in
Overall Machine Length*
278.0 in
Carry Position Approach Angle
15°
Digging Depth*
5.4 in
Maximum Rollback at Ground
43°
Maximum Rollback at Carry Position
50°
Bucket Height in Carry Position
18.0 in
Reach at Full Lift Height and 45° Dump*
54.0 in
Clearance at Full Lift Height and 45° Dump*
114.8 in
Maximum Rollback, Fully Raised
52°
Maximum Dump, Fully Raised
53°
Grading Angle
63°
Height to Bucket Hinge Pin
155.1 in
Overall Machine Height, Bucket Fully Raised
212.7 in
Height to Top of Seat with Headrest
110.6 in
Height to Top of Stack
115.7 in
Ramp Angle
29°
Note
* With general purpose bucket and extra duty teeth.
  • POWER TRAIN
    • Cat C7.1 ACERT diesel engine
    • Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • Twin turbocharged with ATAAC
    • Modular cooling system for engine air intake, oil and water
    • Fan radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
    • Electro Hydrostatic Control (EHC) for transmission with travel and work modes
    • Electric fuel pump
    • Water separator
    • Air cleaner dry-type, axial seal with integral precleaner and dust ejection system, electronic filter condition indicator
    • Engine mounted aftertreatment
    • Muffler, under hood
    • Starting aid, glow plug
    • Cat extended life coolant
  • UNDERCARRIAGE
    • Cat Enhanced Sealed and Lubricated Track (ESALT) tracks
    • Track guiding guards, end section
    • Track adjuster, hydraulic
    • Sprocket rims, with replaceable bolt-on Tough Steel segments
    • Guards, sprocket
    • Seven track rollers per side, with two upper carrier rollers, lifetime lubricated
    • Idlers, conventional type, lifetime lubricated
    • Oscillating track roller frames
  • ELECTRICAL
    • Alternator, 24V, heavy duty brushless
    • Alarm, backup
    • Horn, electric
    • Two heavy duty batteries, high output, maintenance free, 1,120 CCA
    • Switch, main disconnect
    • Starter, electric (heavy duty, 24V)
    • Four halogen lights, two facing forward, roof mounted; two facing rearward integrated into A/C unit
  • OPERATOR ENVIRONMENT
    • Pressurized, sound suppressed, ROPS/FOPS
    • Cab with tinted glass and right side sliding window
    • Air conditioning and heating
    • Heater/defroster with automatic temperature control
    • Seat, fabric-covered, air suspended adjustable
    • Electro hydraulic, seat mounted control levers with faster processing
    • Seat belt, retractable, with indicator on dash
    • Electronic Monitoring System with gauges for: – Engine coolant temperature – Hydraulic oil temperature – DEF level – Fuel level
    • Mirror, rearview, inside, adjustable
    • Radio ready – includes 24V to 12V converter, speakers, antenna and two 12V power outlets
    • Coat hook
    • Storage compartments under left armrest
    • Document holder on right console
    • Floor mat, rubber, heavy duty
    • Windshield washers and wipers, multiple speed front and rear
    • Durable metal roof
    • Parking brake switch and “brake-on” indicator light
    • Fender
  • OTHER STANDARD EQUIPMENT
    • Sound suppression, exterior
    • Z-bar loader linkage
    • Load sensing variable displacement implement pump
    • Implement cylinders sensors
    • Operator programmable lift and tilt
    • Engine enclosure with lockable doors
    • Radiator core 6.5 fpi, debris resistant
    • Hinged radiator guard and swing out fan
    • Guards, full bottom
    • Ecology drains on hydraulic oil tank
    • Product Link ready
    • Oil sampling valves
    • Hoses, Cat XT
    • HYDO Advanced 10
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.