Engine

Flywheel Power
154 hp
Engine Model
Cat C7.1 ACERT
Engine Power (maximum) – SAE J1995
177 hp
Engine Power (maximum) – ISO 14396
173 hp
Engine Power (maximum) – ISO 14396 (DIN)
175 hp
Net Power (rated) – SAE J1349/ISO 9249
154 hp
Net Power (rated) – ISO 9249 (DIN)
156 hp
Note
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D74
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Emissions
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.

Undercarriage

Track on Ground
91.3 in
Track Gauge
72.3 in
Track Shoe Width – Standard
18.9 in
Track Shoe Width – Optional
14.9 in
Track Rollers/Shoes – Each Side
6/37
Ground Contact Area – Standard Shoe
3410 in2
Ground Contact Area – Optional Shoe
2790 in2
Ground Pressure(1) – Standard Shoe
8.8 psi
Ground Pressure(1) – Optional Shoe
11.1 psi
Grouser Height – Double Grouser
1.4 in
Ground Pressure – Standard Shoe
8.6 psi
Ground Pressure – Optional Shoe
10.9 psi
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Service Refill Capacities

Fuel Tank
70 gal
DEF Tank(1)
4.2 gal
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Weights

Operating Weight
33852 lb
Operating Weight(1)
34484 lb
Note
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.

Buckets

Capacity - General Purpose
2.4 yd3
Capacity – Performance Series
2.5 yd3
Capacity – Multi-Purpose
2.1 yd3
Width – General Purpose
97.8 in
Width – Performance Series
99.8 in
Width – Multi-Purpose
97.3 in
Note
Buckets equipped with teeth and segments.

Dimensions

Overall Machine Width without Bucket: Standard Tracks – 480 mm (19.7 in) Shoes
91.2 in
Overall Machine Width without Bucket: Narrow Tracks – 380 mm (14.9 in) Shoes
87.2 in
Ground Clearance
16.4 in
Machine Height to Top of Cab
124.2 in
Overall Machine Length*
251.5 in
Carry Position Approach Angle
15°
Digging Depth*
5.5 in
Maximum Rollback at Ground/Carry Position
43°/50°
Bucket Height in Carry Position
21.6 in
Reach at Full Lift Height and 45° Dump*
47 in
Clearance at Full Lift Height and 45° Dump*
106 in
Maximum Rollback/Dump, Fully Raised
52°/53°
Grading Angle
74°
Height to Bucket Hinge Pin
142.1 in
Overall Machine Height, Bucket Fully Raised
183.7 in
Height to Top of Stack
110.3 in
Ramp Angle
29°
Note
*With general purpose bucket and extra duty teeth.

General Information

Note
For complete machine specifications and available configurations, please see your Cat dealer or look on this website.

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.