The new 982M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life.
Maximum Net Power @ 1,700 rpm – SAE J1349 (metric)
Maximum Net Power @ 1,700 rpm – ISO 9249
Maximum Net Power @ 1,700 rpm – ISO 9249 (metric)
Peak Gross Torque (1,200 rpm) – SAE J1995
Peak Gross Torque (1,200 rpm) – ISO 14396
Maximum Net Torque (1,100 rpm)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, open differential axles, secondary steering, sound suppression, and a 6.1
4.6-12.0 m³ (6.0-15.75 yd³)
Static Tipping Load – Full 40° Turn – with Tire Deflection
Static Tipping Load – Full 40° Turn – No Tire Deflection
For a machine configuration as defined under “Weight.”
Full compliance to ISO 143971:2007 Sections 1 thru 6.
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Implement System: Maximum Pump Output (2,250 rpm)
Implement System: Maximum Operating Pressure
Hydraulic Cycle Time – Total
Service Refill Capacities
Differentials and Final Drives – Front
Differentials and Final Drives – Rear
With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
With Cooling Fan Speed at 70% of Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)**
With Cooling Fan Speed at 70% of Maximum Value: Exterior Sound Power Level (ISO 6395:2008)**
**For machines in European Union countries and in countries that adopt the “EU Directives.”
***European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
Dimensions – Standard Lift
Height to Top of Hood
Height to Top of Exhaust Pipe
Height to Top of ROPS
Center Line of Rear Axle to Edge of Counterweight
Center Line of Rear Axle to Hitch
Overall Length (without bucket)
Hinge-Pin Height at Maximum Lift
Hinge-Pin Height at Carry
Lift Arm Clearance at Maximum Lift
Rack Back at Maximum Lift
Rack Back at Carry Height
Rack Back at Ground
Maximum Width over Tires
All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires.