Engine

Net Power - ISO 9249
298 hp
Engine Model
Cat C9.3 ACERT
Displacement
568 in³
Maximum Power @ 1,800 rpm – SAE J1995
330 hp
Maximum Power @ 1,800 rpm – SAE J1995 (metric)
334 hp
Maximum Power @ 1,800 rpm – ISO 14396
325 hp
Maximum Power @ 1,800 rpm – ISO 14396 (metric)
329 hp
Maximum Net Power @ 1,700 rpm – SAE J1349
298 hp
Maximum Net Power @ 1,700 rpm – SAE J1349 (metric)
302 hp
Maximum Net Torque (1,000 rpm)
1204 lbf-ft
Maximum Net Power @ 1,700 rpm – ISO 9249
298 hp
Maximum Net Power @ 1,700 rpm – ISO 9249 (metric)
302 hp
Peak Gross Torque (1,200 rpm) – SAE J1995
1275 lbf-ft
Peak Gross Torque (1,200 rpm) – ISO 14396
1261 lbf-ft

Weights

Operating Weight
54871 lb
Note
Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, manual diff lock/open axles (front/rear), power train guard, secondary steerin

Buckets

Bucket Capacities
3.20-9.94 m³ (4.19-13.0 yd³)

Operating Specifications

Breakout Force
44075 lbf
Static Tipping Load – Full 37° Turn – with Tire Deflection
35626 lb
Static Tipping Load – Full 37° Turn – No Tire Deflection
38396 lb
Note
For a machine configuration as defined under “Weight.”
Note
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Transmission

Forward 1
4.2 mph
Forward 2
8.1 mph
Forward 3
14.4 mph
Forward 4
24.5 mph
Reverse 1
4.7 mph
Reverse 2
9.3 mph
Reverse 3
16.5 mph
Reverse 4
24.5 mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.

Hydraulic System

Implement Pump Type
Variable Displacement Piston
Implement System: Maximum Pump Output (2,200 rpm)
95 gal/min
Implement System: Maximum Operating Pressure
4496 psi
Hydraulic Cycle Time – Total
10.7 Seconds

Service Refill Capacities

Cooling System
18.9 gal
Crankcase
6.5 gal
Transmission
15.5 gal
Differentials and Final Drives – Front
15.1 gal
Differentials and Final Drives – Rear
15.1 gal
Hydraulic Tank
33 gal
Fuel Tank
79.8 gal

Sound

With Cooling Fan Speed at Maximum Value: Exterior Sound Power Level (ISO 6395:2008)
109 dB(A)
With Cooling Fan Speed at Maximum Value: Exterior Sound Pressure Level (SAE J88:2013)
76 dB(A)*
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value: Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)

Dimensions – Standard Lift

Height to Top of Hood
9.25 ft
Height to Top of Exhaust Pipe
11.58 ft
Height to Top of ROPS
11.75 ft
Ground Clearance
1.42 ft
Center Line of Rear Axle to Edge of Counterweight
8.17 ft
Center Line of Rear Axle to Hitch
5.83 ft
Wheelbase
11.67 ft
Overall Length (without bucket)
25.58 ft
Hinge Pin Height at Maximum Lift
14.67 ft
Hinge Pin Height at Carry
2.25 ft
Lift Arm Clearance at Maximum Lift
12.58 ft
Rack Back at Maximum Lift
56 degrees
Rack Back at Carry Height
50 degrees
Rack Back at Ground
41 degrees
Maximum Width over Tires
9.92 ft
Tread Width
7.33 ft
Note
All dimensions are approximate and based on L3 XHA2 tires.

Dimensions – High Lift

Height to Top of Hood
9.25 ft
Height to Top of Exhaust Pipe
11.58 ft
Height to Top of ROPS
11.75 ft
Ground Clearance
1.42 ft
Center Line of Rear Axle to Edge of Counterweight
8.17 ft
Center Line of Rear Axle to Hitch
5.83 ft
Wheelbase
11.67 ft
Overall Length (without bucket)
26.67 ft
Hinge Pin Height at Maximum Lift
15.75 ft
Hinge Pin Height at Carry
2.58 ft
Lift Arm Clearance at Maximum Lift
13.50 ft
Rack Back at Maximum Lift
71 degrees
Rack Back at Carry Height
49 degrees
Rack Back at Ground
39 degrees
Maximum Width over Tires
9.92 ft
Tread Width
7.33 ft
Note
All dimensions are approximate and based on L3 XHA2 tires.

Bucket Capacities

Bucket Range
3.20-9.94 m³ (4.19-13.0 yd³)
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.