Engine

Base Power (1st gear) - Net
533.0 hp
Engine Model
Cat® C18 ACERT™
Base Power (all gears) - Net
533.0 hp
Base Power (all gears) - Net (Metric)
540.0 hp
Displacement
1104.5 in3

Power Train

Forward/Reverse Gears
6 Forward/3 Reverse
Transmission
Automatic, electronic power shift
Brakes - Service
Oil-actuated, oil-disc
Brakes - Service, Surface Area
15733.0 in2
Brakes - Parking
Spring applied, hydraulically released
Brakes - Secondary
Oil-actuated, oil-disc

Hydraulic System

Circuit Type
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Pump Output
145.0 gal/min
Maximum System Pressure
3500.0 psi
Standby Pressure
450.0 psi

Operating Specifications

Top Speed - Forward
27.0 mph
Top Speed - Reverse
25.8 mph
Turning Radius, Outside Front Tires
40.68 ft
Steering Range - Left/Right
47.5°
Articulation Angle - Left/Right
25°
Forward - 1F
2.3 mph
Forward - 2F
3.6 mph
Forward - 3F
6.0 mph
Forward - 4F
9.4 mph
Forward - 5F
17.4 mph
Forward - 6F
27.0 mph
Reverse - 1R
3.4 mph
Reverse - 2R
9.0 mph
Reverse - 3R
25.8 mph

Service Refill

Fuel Capacity
350.0 gal
Cooling System
24.0 gal
Hydraulic System - Total
70.0 gal
Hydraulic System - Tank
36.0 gal
Circle Drive Housing (each)
2.0 gal
Differential/Final Drives
49.0 gal
Transmission Oil
23.0 gal
Engine Oil
16.0 gal
Tandem Housing (each)
85.0 gal
Front Wheel Spindle Bearing Housing
1.0 gal

Frame

Drawbar - Width
8.9 in
Circle - Diameter
103.6 in
Circle - Blade Beam Thickness
6.3 in
Drawbar - Height
8.5 in
Height - Front Axle Center
33.8 in
Drawbar - Thickness
0.6 in
Front-Top/Bottom Plate - Width
20.2 in
Front-Top/Bottom Plate - Thickness
2.0 in
Front-Side Plates - Width
16.3 in
Front-Side Plates - Thickness
1.0 in
Front Axle - Height to Center
32.2 in
Front Axle - Wheel Lean, Left/Right
18°
Front Axle - Total Oscillation per Side
32°

Tandems

Height
41.0 in
Width
13.9 in
Sidewall Thickness - Inner
1.0 in
Sidewall Thickness - Outer
1.2 in
Drive Chain Pitch
3.0 in
Wheel Axle Spacing
90.0 in
Tandem Oscillation - Front Up
20°
Tandem Oscillation - Front Down
20°

Moldboard

Blade Width
24.0 ft
Arc Radius
21.7 in
Throat Clearance
6.4 in
Cutting Edge - Width
13.0 in
Cutting Edge - Thickness
1.1 in
End Bit - Width
8.0 in
End Bit - Thickness
1.0 in
Blade Pull - Base
86500.0 lb
Blade Pull - Maximum
95940.0 lb
Down Pressure - Base
69583.0 lb
Down Pressure - Maximum
75654.0 lb
Height
40.0 in
Thickness
2.0 in
Width
24.0 ft

Blade Range

Circle Centershift - Right
210.2 in
Circle Centershift - Left
209.9 in
Moldboard Sideshift - Right
193.0 in
Moldboard Sideshift - Left
178.3 in
Maximum Blade Position Angle
35°
Blade Tip Range - Forward
40°
Blade Tip Range - Backward
Maximum Lift above Ground
25.0 in
Maximum Depth of Cut
25.9 in
Maximum Shoulder Reach Outside of Tires - Right
127.1 in
Maximum Shoulder Reach Outside of Tires - Left
126.9 in

Ripper

Ripping Depth - Maximum
17.9 in
Ripper Shank Holders
7
Shank Holder Spacing - Minimum
23.4 in
Shank Holder Spacing - Maximum
23.8 in
Penetration Force
29985.0 lb
Pryout Force
41052.0 lb

Weights

Operating Weight - Typically Equipped
145151.0 lb
Gross Vehicle Weight - Typically Equipped
145151.0 lb
Gross Vehicle Weight - Maximum - Rear Axle
107001.0 lb
Gross Vehicle Weight - Base - Front Axle
42177.0 lb
Gross Vehicle Weight - Base - Rear Axle
96110.0 lb
Gross Vehicle Weight - Maximum - Total
152857.0 lb
Gross Vehicle Weight - Maximum - Front Axle
45856.0 lb
Gross Vehicle Weight - Base - Total
138287.0 lb
Gross Vehicle Weight - Typically Equipped - Front Axle
43100.0 lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
102051.0 lb
Gross Vehicle Weight - Typically Equipped - Total
145151.0 lb

Standards

Brakes
ISO 3450
ROPS/FOPS
ISO 3471/ISO 3449
Sound
ISO 6394/ISO 6395
Steering
ISO 5010

Engine - U.S. EPA Tier 4 Interim Certified

Base Power (all gears) - Net
533.0 hp
Base Power (all gears) - Net (Metric)
540.0 hp
Bore
5.7 in
Derating Altitude
9655.0 ft
Displacement
1104.5 in3
Engine Model
Cat® C18 ACERT™
Maximum Torque - Net
2001.0 lb ft
Number of Cylinders
6
Speed @ Rated Power
1800.0 RPM
Standard - Ambient Capability
122.0 ° F
Standard - Fan Speed - Maximum
1325.0 RPM
Standard - Fan Speed - Minimum
60.0 RPM
Stroke
7.2 in

Engine - Tier 2

Base Power (all gears) - Net
533.0 hp
Base Power (all gears) - Net (Metric)
540.0 hp
Bore
5.7 in
Derating Altitude
10000.0 ft
Displacement
1104.5 in3
Engine Model
Cat C18 ACERT
Maximum Torque - Net
2001.0 lb ft
Number of Cylinders
6
Speed @ Rated Power
1800.0 RPM
Standard - Ambient Capability
122.0 ° F
Standard - Fan Speed - Maximum
1325.0 RPM
Standard - Fan Speed - Minimum
60.0 RPM
Stroke
7.2 in
Torque Rise - Net
30.0 %
  • POWER TRAIN
    • Air cleaner, dual stage dry type radial seal with service indicator and automatic dust ejector
    • Air-to-air after cooler (ATAAC)
    • Brakes, oil disc, four-wheel
    • Demand fan, hydraulic
    • Differential, lock/unlock, Automatic/Manual
    • Drain, engine oil, high speed
    • Electronic over speed protection
    • Engine, C18 with ACERT Technology, diesel, with automatic engine derate and idle control, and compression brake: - C18 ACERT (Tier 3) REQUIRED FOR: United States, Canada, Guam, Samoa, Croatia, Turkey, European Union, Israel, Japan, South Korea, Azores. Note: For U.S. and Canadian dealers only, engine is EPA/ARB Flexibility Engine. Note: For all other regions, engine meets non-current U.S. EPA Tier 3 or EU Stage IIIA emission standards. - C18 ACERT (Tier 2) Provides improved performance in regions using fuel with a high boiling point; improved altitude capability, fuel economy, and resistance to piston deposits. NOT FOR USE BY: United States, Canada, Guam, Samoa, Croatia, Turkey, European Union, Israel, Japan, South Korea, Azores. Note: Engine meets non-current U.S. EPA Tier 2 or EU Stage II emission standards.
    • Ether starting aid
    • Parking brake, multi-disc, sealed and oil cooled
    • Sediment drain, fuel tank
    • Transmission, 6 speed forward and 3 speed reverse, power shift, autoshift
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 ampere, sealed, filtered air intake
    • Batteries, maintenance free, 1,500 CCA
    • Electrical hydraulic valves, base 8
    • Electrical system, 24 volt
    • Grade Control Ready (cab harness, software, electrical hydraulic valves, bosses and brackets)
    • Lights, reversing, stop, tail, turn
    • Starter, receptacle, plug-in
  • OPERATOR ENVIRONMENT
    • Air conditioner and heater
    • Articulation, automatic return to center
    • Defroster fan, rear window
    • Display, digital speed and gear
    • Gauges (analog) inside the cab (fuel, articulation, engine coolant temp, engine RPM and system voltage)
    • Messenger operator information system
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready (entertainment)
    • ROPS cab, sound suppressed less than 75 dB(A) ISO 6394 100% fan speed
    • Seat, cloth, air suspension
    • Throttle control, electronic
    • Windows: laminated glass - fixed front with intermittent wiper, sides (2), rear with wiper/washer
  • TECHNOLOGY PRODUCTS
    • Product Link Ready
  • SAFETY AND SECURITY
    • Clutch, circle drive slip
    • Doors, 8 engine compartment, (four left-hand, four right-hand) locking
    • Ground level engine shutdown
    • Horn, electric
    • Lockout, hydraulic implement for roading and servicing
    • Paint, glare reducing, top of front frame and top of rear enclosure
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Tandem walkway/guards
  • TIRES, RIMS, AND WHEELS
    • 25 × 29 multi-piece rims
  • GROUND ENGAGING TOOLS
    • Cutting edges, 330 mm × 28 mm (13 in × 11⁄8 in), curved DH-2 steel, 25 mm (1 in), mounting bolts, 19 mm (0.75 in), includes endbits
    • Moldboard, 7315 mm × 1067 mm × 50 mm (24 ft × 42 in × 2 in)
    • Ripper, rear, 7 shank capacity, 3 shanks/tips provided
  • FLUIDS
    • Extended Life Coolant to -50° C (-58° F)
    • Fluid check, ground level
  • OTHER STANDARD EQUIPMENT
    • Accumulators, blade lift
    • Autolube, Lincoln Centro-Matic
    • Drawbar, 8 shoe with replaceable wear strips
    • Electrical hydraulic valves, base 8
    • Fuel tank, 1325 L (350 gal) Fast Fill
    • Integrated Cat Grade Control Cross Slope
    • Ground level fueling
    • Push plate-counterweight
    • S·O·SSM ports, engine, hydraulic, transmission, coolant, fuel
  • GROUND ENGAGING TOOLS
    • Cutting edge, 330 mm × 28 mm (13 in × 1.12 in) straight cutting edge
    • Cutting edge, 330 mm × 45 mm (13 in × 1.77 in) straight cutting edge
    • Cutting edge, 406 mm × 28 mm (16 in × 1.12 in) straight cutting edge
    • Cutting edge, 406 mm × 45 mm (16 in × 1.77 in) straight cutting edge
    • Tooth, ripper, straight shank, one tooth
  • HYDRAULICS
    • Control, blade, variable float
  • OPERATOR ACCESS
    • Dual access platform package, basic
    • Dual access platform package, plus
    • Cab basic
    • Cab plus
  • TECHNOLOGY PRODUCTS
    • Product Link
    • Installation, AccuGrade Ready
  • OTHER ATTACHMENTS
    • Fenders, rear
    • Rim, spare 29.5-29
    • Cold weather package
  • LIGHTING PACKAGES
    • Lighting package, basic (halogen)
    • Lighting package, plus (HID)
    • Lighting package, plus (LED)
    • Lights, work, heel 5×5
    • Lights, work, heel HID
    • Lights, work, heel LED
    • Light, LED warning strobe
  • OPERATOR ENVIRONMENT
    • Radio, 12V, AM/FM weather band
    • Radio, satellite, Sirius
    • Radio ready, satellite
    • Camera, rear vision
    • Mirrors, outside mounted
    • Mirrors, outside heated 24V
  • GUARDS
    • Guard package
    • Guard, sound
    • Sound suppression, engine enclosure
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.