Dimensions

Maximum reach
36.0 ft

Operating Specifications

Knuckleboom Length
32.5 ft
Grapple Mounting Knuckle Length
9.0 in
Swing Bearing Diameter
54.0 in
Swing Bearing Gearing
External
Electric Motor
100.0 hp
Electric Power Supply
460 Volt:60 Hz
Operating Weight
18345.0 lb

Engine

Gross Power
100.0 hp

Hydraulic System

Cylinders - Live Heel
152 mm X 102 mm (6 in X 4 in)
Cylinders - Main
152 mm X 102 mm (6 in X 4 in)
Cylinders - Stick
178 mm X 102 mm (7 in X 4 in)
Hydraulic Flow
170/204/61 L/min (45/54/16 gpm)
Hydraulic Pressure - Swing
2500.0 psi
Hydraulic Pressure - System
2500.0 psi
Swing Speed
7.0 RPM

Service Refill Capacities

Fuel Tank
125.0 gal

Weights

Operating Weight
18545.0 lb
  • Motor Power Supply
    • Electric Motor, 74 kW (100 HP) @ 1800 RPM
    • 460 Volt (60 Hz) Electric Power Supply
    • Four (4) Ring High Voltage Collector Ring
    • Service Panel, NEMA 12 Enclosure
    • Pump Drive, Direct Through Flex Coupling
    • Across-the-line Magnetic Starting System
    • Turntable Power Supply Mounting
  • Hydraulic System
    • Three (3) In-Line Gear Pumps
    • Radial Piston Swing Motor
    • Continuous Rotation
    • Electro Hydraulic (EHC) Controls
    • Two Dual Element Return (3 mic)Filtration
    • Filtration Bypass Indicators
    • Diagnostic Nipples @ Pump for serviceability
  • Booms
    • 9.9 m (32’6”) Knuckleboom
    • 22.8 cm (9”) Grapple Mounting Knuckle
  • Structural
    • Steel Mounting
  • 575 Volt (60 Hz) Electric Power Supply
  • Auxiliary Low Voltage Collector Ring
  • Remote Skid Power Supply Mounting
  • Non-Continuous Limited Rotation
  • Oil Reservoir Heater
  • 10.2 m (33’6”) Live Heel Boom
  • 10.9 m (36') Knuckleboom
  • 30.5 cm (12”) Grapple Mounting Knuckle
  • Single “V” Heel
  • Double “VV” Heel
  • Concrete Mounting
  • 30” Subframe Riser Mounting
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.