Specifications

Hole Diameter
203-311 mm (8-12.25 in)
Engine
C32® @ 1,800 rpm
Bit Load
Up to 42 149 kg (Up to 92,922 lb)

Basic Specs

13.7 m (44.9 ft) Mast: Hole diameter range
203-279 mm (8-11 in)
13.7 m (44.9 ft) Mast: Hole diameter range 203-279 mm (8-11 in) – Single pass depth
44.9 ft
13.7 m (44.9 ft) Mast: Hole diameter range 203-279 mm (8-11 in) – Multi pass depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast: Pull-down capacity
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist capacity
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist speed
146.8 ft/min
13.7 m (44.9 ft) Mast: Bit load (single pass)
Up to 31 640 kg (Up to 69,755 lb)
17.5 m (57.4 ft) Mast: Hole diameter range
203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast: Hole diameter range 203-311 mm (8-12.25 in) – Single pass depth
57.4 ft
Angle Drilling
30° (in 5° increments)
Compressor - DTH Drilling
42.2 m³/min (1,500 ft3/min) @ 34.4 bar (500 psi)
17.5 m (57.4 ft) Mast: Pull-down capacity
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist capacity
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist speed
122.7 ft/min
17.5 m (57.4 ft) Mast: Bit load (single pass)
Up to 42 149 kg (Up to 92,922 lb)
Emissions: U.S. EPA Tier 4 Final – Engine
C32 @ 1,800 rpm
Emissions: U.S. EPA Tier 4 Final – Rated horsepower SAE J1995
1018 hp
Emissions: U.S. EPA Tier 4 Final – Rated horsepower ISO 14396
1008 hp
Emissions: Equivalent to Tier 2 – Engine
C32 @ 1,800 rpm
Emissions: Equivalent to Tier 2 – Rated horsepower SAE J1995
1032 hp
Emissions: Equivalent to Tier 2 – Rated horsepower ISO 14396
1025 hp
Compressor: Rotary drilling
56.6 m³/min (2,000 ft3/min) @ 8.6 bar (125 psi)
Compressor: Rotary drilling
73.6 m³/min (2,600 ft3/min) @ 7.6 bar (110 psi)
Compressor: DTH drilling
42.2 m³/min (1,500 ft3/min) @ 34.4 bar (500 psi)
Elevation capable: Tier 2 Equivalent engine
15000 ft
Elevation capable: Tier 4 Final engine
12000 ft
Angle drilling
30° (in 5° increments)
13.7 m (44.9 ft) Mast - Bit Load - Single Pass
Up to 31 640 kg (Up to 69,755 lb)
13.7 m (44.9 ft) Mast - Hoist Capacity
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Hoist Speed
146.8 ft/min
13.7 m (44.9 ft) Mast - Hole Diameter Range
203-279 mm (8-11 in)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-279 mm (8-11 in) - Multi Pass Depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast - Hole Diameter Range 203-279 mm (8-11 in) - Single Pass Depth
44.9 ft
13.7 m (44.9 ft) Mast - Pulldown Capacity
Up to 289.13 kN (Up to 65,000 lb)
17.5 m (57.4 ft) Mast - Bit Load - Single Pass
Up to 42 149 kg (Up to 92,922 lb)
17.5 m (57.4 ft) Mast - Hoist Capacity
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Hoist Speed
122.7 ft/min
17.5 m (57.4 ft) Mast - Hole Diameter Range
203-311 mm (8-12.25 in)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth
Down to 48 m (Down to 157.5 ft)
17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth
57.4 ft
17.5 m (57.4 ft) Mast - Pulldown Capacity
Up to 382.5 kN (Up to 86,000 lb)
Compressor - Rotary Drilling (1)
56.6 m³/min (2,000 ft3/min) @ 8.6 bar (125 psi)
Compressor - Rotary Drilling (2)
73.6 m³/min (2,600 ft3/min) @ 7.6 bar (110 psi)
Elevation Capable - Tier 2 Equivalent Engine
15000 ft
Elevation Capable - Tier 4 Final Engine
12000 ft
Emissions (Equivalent to Tier 2): Engine
C32 @ 1,800 rpm
Emissions (Equivalent to Tier 2): Rated Horsepower - ISO 14396
1025 mm H2O
Emissions (Equivalent to Tier 2): Rated Horsepower - SAE J1995
1032 mm H2O
Emissions (U.S. EPA Tier 4 Final): Engine
C32 @ 1,800 rpm
Emissions (U.S. EPA Tier 4 Final): Rated Horsepower - ISO 14396
1008 mm H2O
Emissions (U.S. EPA Tier 4 Final): Rated Horsepower - SAE J1995
1018 mm H2O

Cooling

Components (1)
Low coolant level sensor
Components (2)
Coolers with easy cleaning access
Components (3)
Separate engine cooling module
Features
Functional in ambient temperature of 52° C (125° F)
Components (4)
Replaceable cooler core sections
Components (5)
Automatic variable speed fan control

Hydraulics

Components (1)
Auxiliary circuit pump
Components (2)
Two fan pumps
Components (3)
Two primary pumps
Components (4)
Scheduled Oil Sampling (S∙O∙S) ports

Climate Choices

Climate Level 1 standard fluids and lubricants
–1° C (30° F) temperatures
Climate Level 1 standard fluids and lubricants
Withstands high heat to 52° C (125° F)
Climate Level 1 Standard Fluids and Lubricants (2)
Withstands high heat to 52° C (125° F)
Climate Level 4 Arctic Fluids and Lubricants (1)
–40° C (–40° F) temperatures
Climate Level 4 Arctic Fluids and Lubricants (2)
Engine coolant and water tank heater, battery trays and provision for fuel heating – diesel fired
Climate Level 4 Arctic Fluids and Lubricants (4)
Arctic fluids, Genset ready, heaters and blankets for tanks, extra batteries, heated water suction lines
Climate Level 4 Arctic Fluids and Lubricants (5)
Shore power connection box with switchable 240-600 volt, 50 amp waterproof connection
Climate Level 4 Arctic fluids and lubricants
Arctic fluids, Genset ready, heaters and blankets for tanks, extra batteries, heated water suction lines
Climate Level 4 Arctic fluids and lubricants
Shore power connection box with switchable 240-600 volt, 50 amp waterproof connection
Climate Level 1 Standard Fluids and Lubricants (1)
–1° C (30° F) temperatures
Climate Level 2 Arctic Fluids and Lubricants (1)
–18° C (–0.4° F) temperatures
Climate Level 2 Arctic Fluids and Lubricants (2)
Extra batteries
Climate Level 4 Arctic Fluids and Lubricants (3)
50 Hz, High or Low Pressure Compressor, Tier 4 Final engine

Engine Choices

U.S. EPA Tier 2 Equivalent - Engine
C32 @ 1,800 rpm
U.S. EPA Tier 4 Final: Rated horsepower SAE J1995
1018 hp
U.S. EPA Tier 4 Final: Rated horsepower ISO 14396
1008 hp
U.S. EPA Tier 4 Final - Engine
C32 @ 1,800 rpm
U.S. EPA Tier 2 Equivalent: Rated horsepower SAE J1995
1032 hp
U.S. EPA Tier 2 Equivalent: Rated horsepower ISO 14396
1025 hp
Components (1)
Dual starter motors
Components
Scheduled oil sampling (S∙O∙SSM) ports
Components (2)
Scheduled oil sampling (S∙O∙SSM) ports
Components (3)
Common air intake filters provide +500 hour service interval (engine and compressor) in normal operating conditions
Components (4)
Ether starting aid
U.S. EPA Tier 2 Equivalent - Rated Horsepower - ISO 14396
1025 mm H2O
U.S. EPA Tier 2 Equivalent - Rated Horsepower - SAE J1995
1032 mm H2O
U.S. EPA Tier 4 Final - Rated Horse Power - ISO 14396
1008 mm H2O
U.S. EPA Tier 4 Final - Rated Horse Power - SAE J1995
1018 mm H2O

Compressor/Receiver Choices

Note
With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
Choice
Compressor control box enclosure with air purged lines
DTH drilling includes tool lubrication and hammer storage
42.2 m3/min (1,500 ft3/min) @ 34.4 bar (500 psi) with High Pressure Receiver Tank for ASME/CRN/AU or CE Tank; hammer storage and tool oiler
Rotary drilling
56.6 m3/min (2,000 ft3/min) @ 8.6 bar (125 psi); with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank
Rotary drilling
73.6 m3/min (2,600 ft3/min) @ 7.6 bar (110 psi) with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank
Choice
Compressor control box enclosure with air purged lines
DTH Drilling - Includes Tool Lubrication and Hammer Storage
42.2 m3/min (1,500 ft3/min) @ 34.4 bar (500 psi) with High Pressure Receiver Tank for ASME/CRN/AU or CE Tank; hammer storage and tool oiler
Note
With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature.
Rotary Drilling (1)
56.6 m3/min (2,000 ft3/min) @ 8.6 bar (125 psi); with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank
Rotary Drilling (2)
73.6 m3/min (2,600 ft3/min) @ 7.6 bar (110 psi) with Low Pressure Receiver Tank for ASME/CRN/AU or CE Tank

Regulatory Compliance

Features (1)
CE compliant
Features (2)
CSA certifiable
Features (3)
EAEU certifiable
Features (4)
CSA certified
Features (5)
MDG15 and MDG41 aligned

Frame and Work Deck

Features (1)
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Components (1)
Stationary rear deck; for vertical and angle drilling
Components (2)
Pipe roller guide assembly on deck for loading pipe
Features (2)
Slip resistant surface on all decks and walkways
Features (3)
Fuel tank capacity 1609 L (425 gal)
Features (4)
Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal)
Features (5)
Fire suppression ready (includes platform on non-drill end to mount bottles, and frame around power train to mount nozzles)
Components (3)
Four leveling jacks to provide leveling on a 7° bench (any orientation)
Components (4)
Walkway, with railing and toe guards
Components (5)
Manual, centralized, lubrication banks for all pivot points on drills, or automated lubrication system (option)
Features (6)
Three egress points on deck areas in addition to main access
Components (6)
Heavy duty tow hooks (front end)
Components (7)
Lift lugs, quantity four, for use with cables or chains
Components (8)
Deck mounted jib crane with 750 kg (1,653 lb) at full extension, can lift from ground level supply to in-deck storage and deck bushing centerline (option)
Features
Three egress points on deck areas in addition to main access
Components (9)
Walkway around cab to drill deck (option)
Components (10)
Bit storage box in-deck with hinged cover (option)
Components (11)
DTH Hammer storage on drill deck with high pressure configuration (option)
Components (12)
Hydraulically operated viewing hatch in drill deck with spotlight (option)
Components (13)
Drill pipe thread greaser with remote fill tank or disposable grease bucket

Access Choices

Choice
Access ladder from cab area on right side of frame
Choice
Cascading, hydraulic self-leveling access stairs to cab area. Includes tram interlock for when the ladder is down. (option)
Choice (3)
Cab perimeter walkway available with either choice
Choice (1)
Access ladder from cab area on right side of frame
Choice (2)
Cascading, hydraulic self-leveling access stairs to cab area. Includes tram interlock for when the ladder is down. (option)

Undercarriage

Model
Cat® 349E EL Excavator type with three carrier rollers, chain guards and guides
Ground clearance
19.3 in
Draw bar pull
560,000 N
Travel speed – via a sensor with in-cab display
1.5 mph
Triple grousers for hard rock
23.6 in
Triple grousers for soft rock
29.5 in
Drawbar Pull
560,000 N
Ground Clearance
19.3 in
Travel Speed - Via a Sensor with In-Cab Display
1.5 mile/h
Triple Grousers for Hard Rock
23.6 in
Triple Grousers for Soft Rock
29.5 in

Mast

Note
Hydraulic, indexing pipe carousels accept various pipe diameters
Note
Configuration choices include single pass, multi pass, vertical or angle drilling
Features
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast complete with pipe carousel
Features
Pulldown/hoist system is a single cylinder
Features
Auto tensioning of pull down and hoist cables
Features
Feed system accommodates multiple pipe diameters
Features
Base plate bushing diameters accommodate bits 235 mm (9.625 in) to 311 mm (12.25 in)
Features
Hydraulic break out wrenches (HOBO) available with adjustable grip ranges
Features
Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer
Features
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features
Angle drilling 0-30°; in 5° increments (option)
Features
Drill pipe positioner with pipe diameter specific inserts
Features
Thread greaser with reloadable tank or disposable grease bucket (option)
Features
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck (option)
Features
Mast lanyard mounting provisions (option)
Features (14)
Rotation Gear Box with dual motor, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)
Features (15)
Pipe catcher; manual or hydraulic (option)
Features (16)
Tool oiler 113 L (30 gal) oil injection system (Rotary drilling only)
Features (17)
Mast access ladder and grating (option)
Features (1)
13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast complete with pipe carousel
Features (10)
Drill pipe positioner with pipe diameter specific inserts
Features (11)
Thread greaser with reloadable tank or disposable grease bucket (option)
Features (12)
Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck (option)
Features (13)
Mast lanyard mounting provisions (option)
Features (2)
Pulldown/hoist system is a single cylinder
Features (3)
Auto tensioning of pull down and hoist cables
Features (4)
Feed system accommodates multiple pipe diameters
Features (5)
Base plate bushing diameters accommodate bits 235 mm (9.625 in) to 311 mm (12.25 in)
Features (6)
Hydraulic break out wrenches (HOBO) available with adjustable grip ranges
Features (7)
Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer
Features (8)
Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (9)
Angle drilling 0-30°; in 5° increments (option)
Note (1)
Hydraulic, indexing pipe carousels accept various pipe diameters
Note (2)
Configuration choices include single pass, multi pass, vertical or angle drilling

Mast Packages: Standard or Premium Choices

13.7 m (44.9 ft) Mast: Single pass depth
44.9 ft
13.7 m (44.9 ft) Mast: Multi pass depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast: Pulldown – rated single cylinder pull-down/hoist system
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast: Hoist
Up to 289.13 kN (Up to 65,000 lb)
17.5 m (57.4 ft) Mast: Single pass depth
57.4 ft
17.5 m (57.4 ft) Mast: Multi pass depth
Up to 48 m (Up to 157.5 ft)
17.5 m (57.4 ft) Mast: Pulldown – rated single cylinder pull-down/hoist system
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast: Hoist – pull-down/hoist
Up to 382.5 kN (Up to 86,000 lb)

Mast Packages - Standard or Premium Choices

13.7 m (44.9 ft) Mast - Mast Accessories Manual
One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket
13.7 m (44.9 ft) Mast - Mast Accessories Hydraulic
One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket
17.5 m (57.4 ft) Mast - Mast Accessories Manual
Two wire rope (17.5 m/57.4 ft) pipe catchers, hydraulically actuated pipe positioner, manual bit basket
17.5 m (57.4 ft) Mast - Mast Accessories Hydraulic
One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket
Angle Drilling
Available with either mast
13.7 m (44.9 ft) Mast - Hoist
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Multi Pass Depth
Down to 62.5 m (Down to 205 ft)
13.7 m (44.9 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System
Up to 289.13 kN (Up to 65,000 lb)
13.7 m (44.9 ft) Mast - Single Pass Depth
44.9 ft
17.5 m (57.4 ft) Mast - Hoist - Pulldown/Hoist
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Multi Pass Depth
Up to 48 m (Up to 157.5 ft)
17.5 m (57.4 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System
Up to 382.5 kN (Up to 86,000 lb)
17.5 m (57.4 ft) Mast - Single Pass Depth
57.4 ft

Carousel and Pipe (Mast size dependent)

13.7 m (44.9 ft) Mast Carousel; takes quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (205 ft): Pipe diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; takes quantity of 4 × 7.6 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel; takes quantity of 2 × 7.6 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameters
9.25 in

Tool Package Rotary

Components (1)
Roller deck bushing
Components (2)
Pipe positioner inserts
Components (3)
Deck wrench, sliding
Components (4)
Shock sub and top sub adapter (option)
Components (5)
Cross over hammer adapter
Components (6)
Pipe wiper seal

Tool Package DTH

Components (1)
Two piece bushing
Components (2)
Pipe positioner inserts
Components (3)
Deck wrench, sliding
Components (4)
Shock sub and top sub adapter (option)
Components (5)
Cross over hammer adapter
Components
Pipe wiper seal
Components (6)
Pipe wiper seal

Overhead Winch System

Capacity rating
4000 lb
Cable diameter
0.5 in
Winch reach – past the drill deck
20 ft
Note
Variable speed control
Cable Diameter
0.5 in
Capacity Rating
4000 lb
Winch Reach - Past the Drill Deck
20 ft

Rotary Head Top Drive System

Components
Spindle with 168 mm (6.625 in) API regular thread with splined collar
Components
Rotation gear box with dual motor, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components
Rotary torque control
Components (4)
Virtual rotary head travel stops and interlocks
Components (1)
Spindle with 168 mm (6.625 in) API regular thread with splined collar
Components (2)
Rotation gear box with dual motor, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque
Components (3)
Rotary torque control

Operator Environment

Cab, Standard

– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shade (option)
– Foldaway trainer’s seat (option)
Cab, Premium

– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Removable floor mat
– Foot rest
– Wrist rests
– Additional in-cab storage box
– Additional windshield wipers on front and rea
Components
Spacious FOPS cab has 3 m2 (32.4 ft2) floor space with an integrated operator station
Components
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Lighting

– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area light and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck
HVAC

– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller wi
Cameras

– Mounted on the front and left sides to provide 360° view from operator's seat
– Camera on the mast to view pipe carousel/top drive operation
Components (6)
Power convertor 24V to 12V
Components (7)
Radio-ready for communication and entertainment radio
Components (8)
Cab roof access ladder (option)
Components (9)
Independent circuit breakers
Components (10)
Literature holder
Components (11)
Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Components (12)
Trainer's seat that folds away and has retractable seat belt (optional)
Lighting:

– LED interior lights; separate reading light, and backlit joysticks and keypads
– Zone controls for area light and spot lighting for night drilling
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck
HVAC:

– Floor vents in the foot rest area
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, does not require roof access, and has approximately 500 hour service interval
– Defogging HVAC vents on driller wi
Cameras:

– Mounted on the front and left sides to provide 360° view from operator’s seat
– Camera on the mast to view pipe carousel/top drive operation
Cab - Premium

– Leather seat with heat and ventilation
– Dual pane window glass
– Front window guard
– Removable floor mat
– Foot rest
– Wrist rests
– Additional in-cab storage box
– Additional windshield wipers on front and rea
Cab - Standard

– Fabric seat
– Single pane window glass
– Windshield wiper for driller window
– Window shade (option)
– Foldaway trainer's seat (option)
Components (1)
Spacious FOPS cab has 3 m2 (32.4 ft2) floor space with an integrated operator station
Components (2)
Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
Components (3)
Two swing out hinged doors with windows and Cat keyed locks
Components (4)
Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color displays, high definition screen and 12 volt power port
Components (5)
Additional display screen for cc cameras; color, high-definition 254 mm (10 in)

Operating System Controls - Standard

Components (1)
All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)
Electric compressor control
Components (3)
Rotation torque control
Components (4)
Virtual rotary head travel stops and interlocks
Components (5)
Pipe positioner engaged/disengaged indicator
Components (6)
Drill depth meter
Components (7)
Drill performance and display system
Components (8)
Delayed engine shut down
Components (9)
Rotary head rpm gauge – digital
Components (10)
Filter indicators for hydraulic, fuel, compressor and engine
Components (11)
Jack pressure sensors in the display
Components (12)
Pump drive gearbox temperature sensor
Components (13)
Dust suppression control
Components (14)
Mast lock indicator
Components (15)
ECM controlled proportional fan speed control system
Components (16)
Tram interlock, machine stability limits
Components (17)
Tram interlock, pipe in hole
Components (18)
Tram interlock, mast up and locked or down and parked
Components (19)
Tram interlock, jacks retracted
Components (20)
Tram interlock, overhead winch parked
Components (21)
Cab environment controls (AC, filter, heat, fan speeds)
Components (22)
Cab manometer with indicator (option)
Components (23)
Dust curtain lifting system – auto hydraulic raise front and rear with gravity down (option)
Components (24)
ECM interlock for the jacks, raises curtains when jacks are lifted
Components (25)
Wiring for Terrain interface
Components (26)
Pre-wired for Terrain and autonomous operation
Components (27)
Zone control for area lighting and spotlighting during dark conditions
Components (28)
Data logging of machine health with warnings, and fault code records; export capability

Automation and Technology

Components
Drill depth indicator and interlocks
Components (1)
Drill depth indicator and interlocks
Components (2)
Auto level, auto retract, auto mast
Components
Product Link Elite (option)
Type
Autonomy ready
Components (5)
Command for Drilling enables each operator to manage more than one machine
Cat Terrain for Drilling - Mining System Interface

– Production
– Navigation
Components (6)
Wiring for third party interface
Components (3)
Drill assist (pass auto drill) (option)
Components (4)
Product Link Elite (option)

Dust Suppression Choices

Choices
Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
Choices
Tram off spray to wet the ground around the cutting pile (not recommended for cold weather applications)
Water injection (standard)
– Water tank capacity 1514 L (400 gal)
Water injection and dust collector (option)
– Water tank capacity 1514 L (400 gal)
– 204 m3/min (7,200 cfm) Dry dust collector box
– Self-cleaning filters, dust chute with clean-out door
High Volume Water Injection system (Not compatible with basic service package)
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Choices
Static dust curtains, four sides boxed in (standard)
Choices
Hydraulic lifters for front and rear dust curtains (optional)
Choices
Low water level indicator
Choices (1)
Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
Choices (2)
Tram off spray to wet the ground around the cutting pile (not recommended for cold weather applications)
Choices (3)
Static dust curtains, four sides boxed in (standard)
Choices (4)
Hydraulic lifters for front and rear dust curtains (optional)
Choices (5)
Low water level indicator
High Volume Water Injection System - Not Compatible with Basic Service Package
– Water tanks total capacity 3785 L (1,000 gal) maximum
– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)
– Secondary tank above deck – 2271 L (600 gal) capacity deck
Water Injection - Standard
– Water tank capacity 1514 L (400 gal)
Water Injection and Dust Collector - Option
– Water tank capacity 1514 L (400 gal)
– 204 m3/min (7,200 cfm) Dry dust collector box
– Self-cleaning filters, dust chute with clean-out door

Safety and Security

Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy
Components (1)
Alloy drill deck covers, with storage provision
Components (2)
Seven engine shut down buttons: one in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left
Components
Electric horn activated by push button in the cab
Components (3)
Electric horn activated by push button in the cab
Components
Hinged protective guard for full front drill window
Components
Guards for exhaust pipes and turbo lines
Components (4)
Tram Alarm with yellow strobe light is automatic and audible
Components (5)
Hinged protective guard for full front drill window
Components (6)
Guards for exhaust pipes and turbo lines
Components (7)
Mast access ladder with mast grating (option)
Components (8)
Three egress points on deck areas in addition to main access
Components (9)
Self-closing, gates secure egress ladder locations
Components (10)
In-deck mount battery box
Components (11)
Ground level keyed battery disconnect/starter lockout with remote jump start terminals.
Components (12)
Air hose retention devices
Feature
Approach angle of 14 degrees facilitates loading and unloading on a lowboy

Service Packages

Package (1)
Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water
Package (2)
Standard – Fast Fill for fuel and water; Automatic Lubrication System
Package (3)
Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose

Dimensions (Approximate) – 13.7 m (44.9 ft) Mast

Width front
17.67 ft
Width rear
20.75 ft
Height mast up
65.5 ft
Body length – standard cab
43.5 ft
Body length – extended cab
45.25 ft
Length mast down – standard cab
69.2 ft
Length mast down – extended cab
70.93 ft

Dimensions (Approximate) – 17.5 m (57.4 ft) Mast

Width front
17.67 ft
Width rear
20.75 ft
Height mast up
78 ft

Hydraulic Break Out Wrench

Variable Grip Hydraulic Break Out Wrench Grip Ranges (1)
177-219 mm (7.0-8.625 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2)
235 mm (9.25 in)

Drill Pipe

12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: DTH
7 in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary or DTH
7.625 in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary (1)
8 in
12.1 m (40 ft) Pipes - Requires Quantity of Four, 13.7 m (44.9 ft) Mast: Rotary (2)
8.625 in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): DTH
7 in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary/DTH
7.625 in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary (1)
8 in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Four (4): Rotary (2)
8.625 in
7.62 m (25 ft) Pipes - 17.5 m (57.4 ft) Mast - Requires Quantity of Only Two: Rotary
9.25 in

Service Tool Options

Option
Bushing Retention Tool 178 to 235 mm (7.000 to 9.250 in) pipe diameter
Lifting Bails (Available on Request; Required for Commissioning)
– 114 mm (4.5 in) API thread
– 140 mm (5.5 in) API thread
– 168 mm (6.625 in) for top sub/shock sub API thread
– 108 mm (4.25 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 193 mm (7.625 in) up to 235 mm (9.25 in) pipe BE

Dimensions (Approximate) - 17.5 m (57.4 ft) Mast

Body Length - Standard Cab
43.5 ft
Body Length - Extended Cab
45.25 ft
Length - Mast Down - Standard Cab
81.7 ft
Length - Mast Down - Extended Cab
83.4 ft
Height - Mast Up
78 ft
Width - Front
17.67 ft
Width - Rear
20.75 ft

Weights - 13.7 m (44.9 ft) Mast

Working Weight Range - Minimum
166450 lb
Working Weight Range - Maximum
209450 lb

Weights - 17.5 m (57.4 ft) Mast

Working Weight Range - Minimum
170900 lb
Working Weight Range - Maximum
209450 lb

Carousel and Pipe - Mast Size Dependent

13.7 m (44.9 ft) Mast Carousel - Takes Quantity of 4 × 12.19 m (40 ft) Pipes; Total Depth 62.5 m (205 ft): Pipe Diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)
17.5 m (57.4 ft) Mast Carousel - Takes Quantity of 2 × 7.6 m (25 ft) Pipes; Total Depth 32.7 m (107.4 ft): Pipe Diameters
9.25 in
17.5 m (57.4 ft) Mast Carousel - Takes Quantity of 4 × 7.6 m (25 ft) Pipes; Total Depth 48 m (157.5 ft): Pipe Diameters
178 mm (7 in), 193 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

Dimensions (Approximate) - 13.7 m (44.9 ft) Mast

Body Length - Extended Cab
45.25 ft
Body Length - Standard Cab
43.5 ft
Height - Mast Up
65.5 ft
Length - Mast Down - Extended Cab
70.93 ft
Length - Mast Down - Standard Cab
69.2 ft
Width - Front
17.67 ft
Width - Rear
20.75 ft
  • FRAME
    • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
  • MAST
    • Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6 m (20 ft) past drill deck
    • Rotary tool lubrication, 113 L (30 gal) oil injection system
    • Mast access ladder, mast grating and lanyard posts
  • DECK
    • Deck mounted jib crane with 750 kg (1,653 lb) at full extension, can lift from ground level supply to in-deck storage and deck bushing centerline
  • OPERATOR ENVIRONMENT
    • Trainer seat that folds away
    • Window shades
    • Manometer pressure gauge
    • Cab roof access ladder
  • SERVICE TOOLS OPTIONS
    • Bushing Retention Tool 178 to 235 mm (7 to 9.25 in) pipe diameter
    • Lifting bails (available on request; required for commissioning)
    • API thread
      – 114 mm (4.5 in)
      – 140 mm (5.5 in)
      – 168 mm (6.625 in) for top sub/shock sub
    • BECO thread
      – 108 mm (4.5 in) for 114 mm (7 in) pipe
      – 152 mm (6 in) for 193 mm (7.625 in) up to 235 mm (9.25 in) pipe
  • TECHNOLOGY PRODUCTS
    • Product Link Elite – cellular
    • Product Link Elite – satellite
    • Product Link Elite – Dual (cellular and satellite)
  • DUST SUPPRESSION
    • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
    • Tram off spray system
  • DRILL PIPE
    • 12.1 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel accepts quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 193 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
    • 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel accepts quantity of four
      – DTH – 178 mm (7 in)
      – Rotary/DTH – 193 mm (7.625 in)
      – Rotary – 203 mm (8 in)
      – Rotary – 219 mm (8.625 in)
      – Rotary – 235 mm (9.25 in) Carousel accepts quanti
  • DEALER OPTIONS
    • Window tint/film
    • Kit to convert Genset ready from 50 Hz to 60 Hz
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.