Engine

Flywheel Power
436.0 hp
Emissions
U.S. EPA Tier 4 Final and EU Stage IV

Engine - U.S. EPA Tier 4 Final/EU Stage IV

Engine Model
Cat® C18 ACERT™
Net SAE J1349/ISO 9249
436.0 hp
Bore
5.7 in
Displacement
1106.0 in3
Engine Model
Cat C18 ACERT
Engine Power - Gross SAE J1995*
469.0 hp
Engine Power - ISO 14396
460.0 hp
Engine Power - Net Power SAE J1349/ISO 9249
436.0 hp
Note
*Excludes all fan losses.
Stroke
7.2 in

Weights

Operating Weight
106618.0 lb
Shipping Weight
80062.0 lb

Dimensions

Height (FOPS Cab)*
150.4 in
Height (ROPS/Canopy)*
157.5 in
Height (Top of Stack)*
157.4 in
Length Basic Tractor with Drawbar
204.0 in
Length Basic Tractor with Winch
218.3 in
Length with Multi-Shank Ripper
257.4 in
Length with SU-Blade**
270.9 in
Length with Single-Shank Ripper
257.0 in
Length with U-Blade
274.3 in
Overall Length (SU-Blade/SS Ripper)
324.0 in
Overall Length Basic Tractor
193.3 in
Track Gauge
88.6 in
Width over Trunnions
129.9 in
Width without Trunnions (Standard Shoe)
113.4 in
Ground Clearance*
23.4 in
Drawbar Height (Center of Clevis)*
30.0 in
Length of Track on Ground
136.6 in
Note
*Includes grouser height for total dimensions on hard surfaces.
Note
**Includes drawbar.

Transmission

1 Forward
2.4 mph
2 Forward
4.2 mph
3 Forward
7.3 mph
1 Reverse
2.9 mph
2 Reverse
5.2 mph
3 Reverse
8.9 mph
1 Forward - Drawbar Pull
161000 lbf
2 Forward - Drawbar Pull
90000 lbf
3 Forward - Drawbar Pull
50000 lbf

Hydraulic Controls

Pump Type
Piston-type pump geared from flywheel
Pump Output (Steering)
102.0 gal/min
Pump Output (Implement)
60.0 gal/min
Tilt Cylinder Rod End Flow
37.0 gal/min
Tilt Cylinder Head End Flow
50.0 gal/min
Tilt Cylinder Relief Valve Setting
2800.0 psi
Ripper (Lift) Relief Valve Setting
3800.0 psi
Ripper (Pitch) Relief Valve Setting
3800.0 psi
Tank Capacity
23.5 gal
Lift Cylinder Relief Valve Setting
3800.0 psi
Steering System Pressure
5875.0 psi

Undercarriage

Shoe Type
Extreme Service
Width of Shoe
24.0 in
Shoes/Side
43
Grouser Height
3.3 in
Pitch
9.4 in
Ground Clearance
23.5 in
Track Gauge
88.6 in
Length of Track on Ground
136.6 in
Ground Contact Area
6569.0 in2
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)

Service Refill Capacities

Fuel Tank
217.0 gal
Cooling System
25.9 gal
Engine Crankcase*
9.7 gal
Power Train
43.3 gal
Final Drives (each)
3.9 gal
Roller Frames (each)
11.9 gal
Pivot Shaft Compartment
7.9 gal
DEF Tank
9.5 gal
Hydraulic Tank Oil (only)
23.5 gal
Note
*With oil filters.

Winches

Winch Model
PA 140VS
Weight*
3950.0 lb
Oil Capacity
4.0 gal
Increased Tractor Length
21.9 in
Drum Width
12.6 in
Flange Diameter
24.0 in
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Overall Winch
48.3 in
Wire Cable Diameter – Recommended
1.13 in
Wire Cable Diameter – Optional
1.25 in
Maximum drum capacity – Recommended Cable Length
257 ft
Maximum drum capacity – Optional Cable Length
204 ft
Wire Cable Ferrule Size – Outside Diameter
2.4 in
Wire Cable Ferrule Size – Length
2.8 in

Standards

FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 May 94, ISO 3471:1994.
  • ELECTRICAL
    • Alternator, 150-amp
    • Back-up alarm
    • Batteries (two), 12-volt, 200 amp-hour
    • Converter, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Light, engine compartment
    • Lighting system, six halogen and two LED
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Armrest, adjustable
    • Cab, FOPS
    • Cab heater
    • Deactivation switch, hydraulic controls
    • Decelerator pedal
    • Differential steer, power turn
    • Governor switch, electronic
    • Hydraulic system, electronically controlled for bulldozer and ripper control
    • Information display - multi-color
    • Mirror, rearview
    • MP3/IPOD ready
    • Radio ready, entertainment
    • ROPS mounted air conditioner
    • ROPS rollbar
    • Seat: - Cloth, air suspension
    • Seat belt, retractable 76 mm (3 in)
    • Steering and transmission control
    • Wipers, intermittent low and high speeds
  • POWER TRAIN
    • Aftercooler, air-to-air
    • Air filter, with precleaner
    • Aluminum bar plate radiator, 6 fpi
    • C18 with ACERT Technology, Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
    • Coolant, extended life
    • Shift management: - Advanced Productivity Electronic Control System (APECS) - Enhanced AutoShift (EAS)
    • Engine idle shutdown timer
    • Ether starting aid, automatic
    • Fast fuel system
    • Fuel priming pump, key-on, electric
    • High speed oil change system, engine and power train
    • Muffler
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Three planet, double-reduction planetary final drives
    • Torque converter
    • Transmission, electronic control (ECPC), (3F/3R speeds)
  • SAFETY AND SECURITY
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator Not Present Monitor System
    • Seat belt warning system
    • Slope and side-slope monitor
  • UNDERCARRIAGE
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Three bolt idler caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • OTHER STANDARD EQUIPMENT
    • Automated Blade Assist ready (for dual tilt)
    • CD ROM parts book
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Product Link (Satellite)
    • Vandalism protection (eight caplocks)
    • VIMS 3G
  • BULLDOZER ATTACHMENTS
    • 9SU blade
    • 9SU blade, push plate
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9SU landfill blade
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • GUARDS
    • Bottom guards, front counterweight
    • Bottom guards, partial
    • Bottom guards, sealed
    • Guard, fuel tank
    • Guard, fuel tank with transmission guard
    • Guard, undercarriage idlers
    • Guard, striker bars - front
  • OPERATOR ENVIRONMENT
    • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
    • Operators arrangements: – 5th percentile arrangement – Quick opening floor plates
    • Powered precleaner
    • Seat: – Vinyl with air suspension – Heated and ventilated cloth seat with air suspension
    • Visibility package: – Mirrors – Single camera
    • Window shades
  • POWER TRAIN
    • Coolant, arctic
    • Engine prelube
    • Exhaust, wrapped: – Insolated Clean Emissions Module
    • Final drives: – Cold weather – Guarded – Waste handling
    • Ground level DEF fill
    • Reversible cooling fan
  • REAR ATTACHMENTS
    • CapSure hammerless installation and positive retention system – Single shank – Multi shank – Single shank deep
    • Counterweights
    • Drawbar, rear
    • Multi-shank ripper: – Standard
    • Single-shank ripper – Pin Puller – Standard
    • Striker bar
    • Winch*
    • *A rear attachment and/or counterweight is recommended for improved performance and balance.
  • SAFETY AND SECURITY
    • Lights – Twelve, (includes ten halogen and two LED) – HID (includes four halogen, six HID, and two LED) – LED, (includes twelve LED work lights)
    • Rear window screen
    • Warning strobe
  • SPECIAL ARRANGEMENTS
    • High debris
    • Sound
    • Stockpile
    • Waste handling
  • TECHNOLOGY
    • AccuGrade installation
    • Performance – AutoCarry – Automatic ripper control
    • Cat Grade Control 3D
    • Terrain for Grading
  • UNDERCARRIAGE
    • Carrier roller – Carrier rollers, cold weather
    • Tracks, PPR, sealed and lubricated – 560 mm (22 in), Extreme Service – 610 mm (24 in), Extreme Service – 610 mm (24 in), Extreme Service Trapezoidal Hole – 610 mm (24 in), Super Extreme Service – 610 mm (24 in), Super Extreme Service Trapezoidal Hole – 685 mm (27 in), Extreme Service – 685 mm (27 in), Extreme Service Clipped Grousers – 685 mm (27 in), Extreme Service Trapezoidal Hole – 685 mm (27 in), Super Extreme Service – 760 mm (30 in), Moderate Service – 760 mm (30 in), Moderate Service Trapezoidal Hole
    • Undercarriage arrangements – Abrasion – Cold weather – Waste handling
  • OTHER ATTACHMENTS
    • Battery, cold weather (includes two sets of batteries and two starter motors)
    • Fuel lines, cooler
    • Heater, engine coolant
    • Hydraulics, dual tilt (with Auto Blade Assist)
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.