Engine

Engine Model
Cat® C9.3 ACERT™
Flywheel Power
251 hp
Bore
4.5 in
Stroke
5.9 in
Displacement
567 in3
Global Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Engine Power (Maximum) – SAE J1995
270 hp
Engine Power (Maximum) – ISO 14396
266 hp
Engine Power (Maximum) – ISO 14396 (DIN)
270 hp
Net Power (Rated) – ISO 9249/SAE J1349
238 hp
Net Power (Rated) – ISO 9249/SAE J1349 (DIN)
241 hp
Net Power (Maximum) – ISO 9249/SAE J1349
251 hp
Net Power (Maximum) – ISO 9249/SAE J1349 (DIN)
254 hp
Note
Rated power occurs at 1,700 rpm. Maximum power occurs at 1,600 rpm.

Service Refill Capacities

Cooling System
22.5 gal
Engine Crankcase
8 gal
Final Drives (each)
7 gal
Pivot Shaft Compartment
1.8 gal
Power Train
16 gal
Fuel Tank
113.5 gal
DEF Tank
4.75 gal
Roller Frames (each)
11 gal
Hydraulic Tank
20 gal

Weights

Operating Weight
71455 lb
Shipping Weight
59456 lb
Operating Weight – LGP S WHA
69478 lb
Operating Weight – LGP U WHA
71455 lb
Note
Shipping Weight includes lubricants, coolant, ROPS/FOPS cab, standard track and 10% fuel.
Note
Operating Weight includes blade, lubricants, coolant, full fuel tank, standard track, striker box and operator.

Standards

ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II
Brakes
Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008

Drive Train

AC Compressor Maximum Input Current
12 Amps
AC Compressor Nominal Input Voltage
320 Volts
AC Generator and Propulsion Module Voltage
480 Volts
Note
Nominal current dependent on heat/humidity loading on HVAC unit.
Type
Electric Drive

Undercarriage

Track Gauge
90 in
Type
Heavy Duty Undercarriage
Configuration
LGP
Number of Rollers (each side)
8
Number of Shoes (each side)
44
Pitch
8.5 in
Shoe Width
36 in
Grouser Height (MS)
2.75 in
Length of Track on Ground (Heavy Duty)
136 in
Ground Contact Area (Heavy Duty)
9792 in2
Ground Pressure (Heavy Duty) – ISO 16754
6.4 psi
Ground Clearance
18.6 in

Bulldozer Specifications – 7S LGP Blade

Blade Capacity (SAE J1265)
25 yd3
Width (over end bits)
15.1 ft
Height
8 ft
Digging Depth
24.8 in
Ground Clearance
50.9 in
Maximum Tilt
30.9 in
Weight*
8875 lb
Note
*Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).

Bulldozer Specifications – 7U LGP Blade

Blade Capacity (SAE J1265)
30 yd3
Width (over end bits)
15.4 ft
Height
8 ft
Digging Depth
27.3 in
Ground Clearance
52.6 in
Maximum Tilt
30.9 in
Weight*
11645 lb
Note
*Weight includes cylinder mounting, lift cylinder and lines, blade, push arms, trunnions, trash rack and cylinder lines (Tilt).

Dimensions – LGP (Approximate)

Track Gauge
90 in
Width of Tractor over Trunnions
135 in
Width of Tractor without Trunnions (std. shoes)
126 in
Machine Height from Tip of Grouser – Top of Stack
132 in
Machine Height from Tip of Grouser – Top of Standard Cab
134 in
Machine Height from Tip of Grouser – From Ground Face of Shoe
131 in
Length of Track on Ground
136 in
Length of Basic Tractor
181 in
Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip at ground line)
N/A
Length of Basic Tractor – With the following attachment add to basic tractor length: Ripper (with tip fully raised)
N/A
Length of Basic Tractor – With the following attachment add to basic tractor length: Drawbar
10.6 in
Length of Basic Tractor – With the following attachment add to basic tractor length: S Blade
53.5 in
Length of Basic Tractor – With the following attachment add to basic tractor length: U Blade
76.6 in
Height of Grouser
2.75 in
Ground Clearance
18.6 in
Ground Contact Area (std. shoes)
9792 in2
Number of Shoes per Side
44
Standard Shoe Width (Moderate Service)
36 in
Ground Pressure
6.4 psi
Pitch
8.5 in
Track Rollers/Side
8
Number of Carrier Rollers
2
Drawbar Height (grouser tip to center of clevis)
28 in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg of refrigerant which has a CO2 equivalent 1.716 metric tonnes.
  • ELECTRICAL
    • Accessory Power Converter (APC)
    • Alarm, Backup
    • Batteries, Heavy Duty
    • Converter, 24V to 12V, 10 Amp
    • Heater, Engine Coolant, 120V
    • Horn, Forward Warning
    • Product Link
  • OPERATOR ENVIRONMENT
    • Enhanced Clean Cab
    • Air Suspension Seat
    • Cab Door Screens
    • Armrest, Adjustable
    • Bidirectional Shift Switch
    • Center Post Cab, ROPS/FOPS
    • Continuously Variable Speed Control
    • Differential Steering
    • Electro-Hydraulic Controls
    • Electronic Monitoring System
    • Foot Supports, Dash
    • Hour Meter, Electronic
    • Machine Isolation, Operator Not Present
    • Mirror, Rearview
    • Modular HVAC, Cab Mounted
    • Radio Ready, 12V
    • Seat Belt, Retractable 76 mm (3")
    • Speed Recall Button
    • Throttle Dial, Electronic
    • Tilt Cab and Tilt Cab Jack
    • Travel Control Pedal
    • Wipers, Intermittent
  • POWER TRAIN
    • Final Drive Flange Protection Guards
    • Final Drive Clamshell Guard
    • Engine Thermal Shields
    • Heavy Duty Final Drive Flange Guards
    • Aftercooler
    • Air Cleaner, Precleaner with Strata Tube Dust Ejector
    • C9.3 ACERT Engine – Meets Tier 4 Final/Stage IV/Korea Tier 4 emission standards
    • Continuously Variable Speed Transmission
    • Coolant, Extended Life
    • Drains, Ecology, Power Train
    • Electronic Air Cleaner Service Indicator
    • Fan, Hydraulically Driven Demand
    • Final Drives, Double Reduction
    • Fuel Priming Pump, Electronic
    • Parking Brake, Electronic
    • Starting Aid, Ether
    • Water Cooled Turbocharger, Wastegated
    • Water Separator
    • Reversing Fan
  • UNDERCARRIAGE
    • Heavy Duty Track (660 mm/26" MS Trap)
    • Heavy Duty Track (914 mm/36" MS Trap)
    • Guards, End Track Guiding
    • Idler Guards
    • Master Link
    • Idler Seal Guards, Kevlar Design
    • Track Roller Frame Debris Guard
    • Rollers and Idlers, Lifetime Lubricated
    • Sprocket Rim Segments, Replaceable
    • Track Adjusters, Gas Spring Recoil
    • Grease Track Adjust
    • Guard Group, Track Guide
  • OTHER STANDARD EQUIPMENT
    • Fenders, Heavy Duty
    • Chassis Guarding on Mainframe
    • Seal Guard Group
    • Crankcase Guard Group
    • Fuel Tank Guards
    • Dozer Lines Guards
    • Black Hood and Dozer Lift Cylinder
    • Screen, Grill Door
    • CD ROM Parts Book
    • Engine Enclosures, Perforated
    • Front Tow Hook
    • Grade Control Ready
    • Guards, Hinged Bottom
    • Hood, Perforated
    • Hydraulics, Load Sensing, Dozer Lift and Tilt
    • Oil Cooler, Hydraulic
    • S·O·SSM Sampling Ports
    • Radiator Doors, Louvered, Double Hinged
    • Vandalism Protection for Fluid Compartments and Battery Box
    • Insulated Clean Emissions Module
  • AccuGrade Ready Installation
  • Arrangement
  • Back of Blade, Black
  • Cold Weather Attachments
  • Engine Coolant Heater, 240V
  • Fast Fuel
  • Heavy Duty Final Drive Flange Guards
  • Rear Screen
  • Heated Seat
  • Lights
    • Basic (6) Lights
    • Premium (10) HID and Halogen Lights
  • Power Train Oil Change System
  • Rear Vision Camera
  • Rear Striker Box or Multi-shank Ripper with Striker Bar and Ripper Hydraulics
  • Sound Suppression (Europe)
  • Track Guide Guards
  • Landfill Bulldozer Blades – with Trash Racks
    • LGP S
    • LGP U
  • Heavy Duty Track (660 mm/26" ES Trap)
  • Heavy Duty Track (914 mm/36" ES Trap)
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.