Engine

Engine Model
Cat C15 ACERT™
Flywheel Power
335 hp
Bore
5.4 in
Stroke
6.75 in
Displacement
928 in3
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
317 hp
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349
335 hp
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349 DIN
343 hp
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349
312 hp
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Note
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Weights

Operating Weight
86710 lb

Operating Weight

Standard Waste Handler
86710 lb
LGP Waste Handler
91600 lb

Shipping Weight

Standard Waste Handler
73400 lb
LGP Waste Handler
77900 lb

Dimensions – Standard

Height (to top of roof-mounted precleaner)
145.2 in
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
Height of Grouser
3.1 in
Track Gauge
82.0 in
Width of Tractor (over trunnions)
120.4 in
Without Trunnions (standard shoe width)
106.0 in
Machine Height (from grouser tip) – Exhaust Stack
136.7 in
Machine Height (from grouser tip) – EROPS (to top of railing)
140.4 in
Machine Height (from grouser tip) – Length of Track on Ground
126.2 in
Machine Height (from grouser tip) – Ground Clearance
24.1 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – Non-Suspended

Height (to top of roof-mounted precleaner)
145.2 in
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
Height of Grouser
3.1 in
Track Gauge
82.0 in
Width of Tractor (over trunnions)
120.4 in
Without Trunnions (standard shoe width)
106.0 in
Machine Height (from grouser tip) – Exhaust Stack
136.3 in
Machine Height (from grouser tip) – EROPS (to top of railing)
140.7 in
Machine Height (from grouser tip) – Length of Track on Ground
128.3 in
Machine Height (from grouser tip) – Ground Clearance
23.8 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – LGP

Height (to top of roof-mounted precleaner)
145.2 in
Length Basic Tractor (with striker bars with two counterweights)*
206.4 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183.0 in
Height of Grouser
3.1 in
Track Gauge
92.0 in
Width of Tractor (over trunnions)
130.4 in
Without Trunnions (standard shoe width)
130.0 in
Machine Height (from grouser tip) – Exhaust Stack
129.7 in
Machine Height (from grouser tip) – EROPS (to top of railing)
140.4 in
Machine Height (from grouser tip) – Length of Track on Ground
126.2 in
Machine Height (from grouser tip) – Ground Clearance
24.1 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Blades – Capacity (SAE J1265)

8 SU Landfill
25.6 yd3
8 U Landfill
27.7 yd3
8 SU LGP Landfill
28.9 yd3

Blades – Width (over end bits)

8 SU Landfill
12.9 ft
8 U Landfill
13.9 ft
8 SU LGP Landfill
14.9 ft

Transmission

1 Forward
2.1 mph
2 Forward
3.8 mph
3 Forward
6.6 mph
1 Reverse
2.8 mph
2 Reverse
5 mph
3 Reverse
8.8 mph
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.