Engine

Engine Model
Cat C7.1 ACERT™
Flywheel Power
182 hp
Bore
4.1 in
Stroke
5.3 in
Displacement
433 in3
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349 (DIN)
168 hp
Net Power (Maximum – 2,200 rpm): SAE J1995
182 hp
Net Power (Maximum – 2,200 rpm): ISO 14396
178 hp
Net Power (Rated – 1,800 rpm): ISO 9249/SAE J1349
166 hp
Emissions
Tier 4 Final/Stage IV/Korea Tier 4 Final
Note
All non road Tier 4, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (EPA), 10 ppm (EU) (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are a
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power (Maximum – 2,200 rpm): ISO 14396 (DIN)
180 hp
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Weights

Operating Weight
40818 lb
Operating Weight – XL Waste Handler
40818 lb
Operating Weight – LGP Waste Handler
44749 lb
Shipping Weight – XL Waste Handler
40029 lb
Shipping Weight – LGP Waste Handler
43642 lb

Dimensions – XL

Track Gauge
74.4 in
Width of Tractor (without trunnions)
98.4 in
Machine Height from Tip of Grouser to Exhaust Stack
122.4 in
Length of Track on Ground
101.6 in
Length of Basic Tractor (with drawbar)*
157.3 in
Height of Grouser
2.6 in
Ground Clearance
14.3 in
Ground Pressure
6.7 psi
Note
*Add 1185 mm (46.7 in) to length of basic tractor (with drawbar) with SU blade added. Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Dimensions – LGP

Track Gauge
85.0 in
Width of Tractor (without trunnions)
118.0 in
Machine Height from Tip of Grouser to Exhaust Stack
126.9 in
Length of Track on Ground
122.7 in
Length of Basic Tractor (with drawbar)*
166.2 in
Height of Grouser
2.2 in
Ground Clearance
18.8 in
Ground Pressure
4.5 psi
Note
*Add 957 mm (37.7 in) to length of basic tractor (with drawbar) with ripper (with tip at ground line).

Blades – Capacity (SAE J1265)

XL VPAT Landfill*
8.29 yd3
XL VPAT
4.3 yd3
XL SU
5.6 yd3
LGP VPAT Landfill*
7.39 yd3
LGP VPAT
5.1 yd3
Note
*Blade capacity with trash rack.

Transmission

0.5 Forward
1.6 mph
0.7 Forward
1.7 mph
1.5 Forward
2.7 mph
1.7 Forward
3.0 mph
2.5 Forward
4.7 mph
2.7 Forward
5.2 mph
0.5 Reverse
1.9 mph
0.7 Reverse
2.1 mph
1.5 Reverse
3.4 mph
1.7 Reverse
3.7 mph
2.5 Reverse
5.9 mph
2.7 Reverse
6.5 mph
1.0 Forward
2.1 mph
2.0 Forward
3.6 mph
3.0 Forward
6.1 mph
1.0 Reverse
2.5 mph
2.0 Reverse
4.4 mph
3.0 Reverse
7.6 mph

Blades – Width (over end bits)

XL VPAT Landfill*
10.23 ft
XL VPAT
10.75 ft
XL SU
10.33 ft
LGP VPAT Landfill*
12.89 ft
LGP VPAT
13.38 ft
Note
*Blade capacity with trash rack.
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.