Engine

Gross Power
253.0 hp
Net Power
232.0 hp
Engine Model
Cat® C9 ACERT™
Net Power ISO 3046-2
232.0 hp
Net Power ISO 9249
235.0 hp
SAE J1349
232.0 hp
EEC 80/1269
235.0 hp
Torque Rise
19.0 %
Bore
4.4 in
Stroke
5.9 in
Displacement
537.0 in3

Transmission

Forward 1
3.5 mph
Forward 2
5.9 mph
Reverse 1
4.0 mph
Reverse 2
6.6 mph

Hydraulic System

Vane Pump Output at 2015 rpm and 6900 kPa (1000 psi)
29.6 gal/min
Relief Valve Setting
2248.0 psi
Lift Cylinder Bore x Stroke
120.65 mm x 913.9 mm 4.75 in x 36 in

Axles

Front
Fixed
Oscillating Rear
±8°

Brakes

Standards
Meet OSHA regulations

Wheels - Plus Tip Teeth with Abrasion Resistant Material (ARM)

Drum Width
3.33 ft
Drum Diameter
4.25 ft
Tips per Wheel
20

Wheels - Chevron-Pattern, Chopper Blades

Drum Width
3.33 ft
Drum Diameter
4.25 ft
Blades per Wheel
20

Straight Blade

Width Over End Bits
11.9 ft
Moldboard Length
11.67 ft
Height
6.27 ft

Service Refill Capacities

Fuel Tank
117.8 gal
Cooling System
14.5 gal
Crankcase
9.0 gal
Transmission
13.2 gal
Differentials and Final Drives - Front
11.4 gal
Differentials and Final Drives - Rear
11.4 gal
Hydraulic System (including Tank)
36.2 gal
Hydraulic Tank
23.2 gal

Weights

Operating Weight
52364.0 lb

Cab

ROPS/FOPS
Meet SAE and ISO standards

Sound Performance

Standards
Meet required sound standards

Operating Specifications

Ground Clearance
1.5 ft

Dimensions (Approximate)

Height to Top of Cab with A/C
12.75 ft
Height to Top of Exhaust Pipe
11.36 ft
Height to Top of Hood
8.16 ft
Ground Clearance to Bumper
2.64 ft
Ground Clearance to Striker Bars
2.13 ft
Center Line of Rear Axle to Edge of Bumper
6.22 ft
Center Line of Rear Axle to Hitch
5.5 ft
Wheelbase
10.9 ft
Length with Blade on Ground
25.76 ft
Width over Wheels
10.95 ft
Width over Endbits (Blade)
11.99 ft
Turning Radius - Outside End Bits
21.21 ft
Blade Width Straight
11.67 ft
Drum Width
3.33 ft
Ground Clearance
1.49 ft
  • ELECTRICAL
    • Alarm, backup
    • Alternator (80 amp)
    • Batteries, maintenance-free (2)
    • Diagnostic connectors
    • Lighting system, halogen (front, rear and cab-mounted)
    • Starting and charging system (24-volt)
    • Starting receptacle for emergency starts
  • GUARDS
    • Axle (front and rear)
    • Drive shaft
    • Hinged crankcase
    • Hydraulic tank
    • Power train
    • Steering cylinder
  • OPERATOR ENVIRONMENT
    • Air conditioner, roof-mounted
    • Blade control system locks
    • Array
    • Coat hook
    • Cigar lighter and ashtray
    • Array
    • Dome light (cab)
    • Fuses, blade style (in-cab)
    • Heater and defroster
    • Horn, electric (steering wheel mounted)
    • Hydraulic steering
    • Lunchbox and beverage holders
    • Mirrors, rearview (internally-mounted)
    • Seat, KAB mechanical suspension
    • Seat belt, retractable, 76 mm (3 in) wide
    • Array
  • POWER TRAIN
    • Array
    • Array
    • Engine cooling fan (suction)
    • Fuel priming pump (electric)
    • Muffler
    • Radiator, Next Generation Modular (NGMR)
    • Starting aid (ether)
    • Torque converter
    • Array
  • OTHER STANDARD EQUIPMENT
    • Cat O-ring face seals/couplings
    • XT hoses
    • Array
    • Hitch, drawbar with pin
    • Hood, metallic with lockable service doors
    • Hydraulic oil cooler
    • Oil sampling valves
    • Striker bars (all wheels)
    • Vandalism protection caplocks
    • Wheels (1016 mm/40 in) with weld-on Plus Tips with extended inner rim
  • BULLDOZER
    • Bulldozer blade, hydraulics and linkage are not included in standard equipment
  • ANTIFREEZE
    • Premixed 50 percent concentration of Extended Life Coolant with freeze protection to -34° C (-29° F)
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.