Engine

Engine Model
Cat® C7.1 ACERT™: configured for two emissions options
Net Power
248 hp
Bore
4.1 in
Stroke
5.3 in
Displacement
427.8 in3
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Rated Power (SAE J1349) – Tier 4 Final/Stage IV
248 hp
Rated Power (Net ISO 9249) – Tier 4 Final/Stage IV
248 hp
Gross Power (SAE J1995) – Tier 4 Final/Stage IV
284 hp
Gross Power (ISO 14396) – Tier 4 Final/Stage IV
274 hp
Maximum Net Torque @ 1,400 rpm – Tier 4 Final/Stage IV
899 lbf-ft
Torque Rise – Tier 4 Final/Stage IV
52%
Rated Power (SAE J1349) – Tier 3/Stage IIIA equivalent
249 hp
Rated Power (Net ISO 9249) – Tier 3/Stage IIIA equivalent
249 hp
Gross Power (SAE J1995) – Tier 3/Stage IIIA equivalent
286 hp
Gross Power (ISO 14396) – Tier 3/Stage IIIA equivalent
275 hp
High Idle Speed
2270 rpm
Low Idle Speed
800 rpm
Maximum Net Torque @ 1,400 rpm – Tier 3/Stage IIIA equivalent
749 lbf-ft
Torque Rise – Tier 3/Stage IIIA equivalent
26%
Maximum Altitude without Derating
9842.52 ft

Wheels

Drum Width
3.25 ft
Drum Diameter
3.38 ft
Outside Diameter
4.63 ft
Tips per Wheel
60
Weight
9720 lb
Width over Drums
10.64 ft

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±10°

Blades

Maximum Depth of Cut
0.73 ft
Maximum Lift Above Ground
2.63 ft
Total Tilt Adjustment
2.14 ft
Width Over End Bits
12.34 ft
Width – Moldboard Length
11.98 ft
Height Including Cutting Edge
2.82 ft
Blade Tilt Angle – Right – Hydraulic
4.8°
Blade Tilt Angle – Left – Hydraulic
5.5°
Blade Tilt Adjustment – Right
1 ft
Blade Tilt Adjustment – Left
1.14 ft

Operating Specifications

Operating Weight
49353 lb
Maximum Operating Weight (Tier 4 Final/Stage IV)
49353 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
48740 lb

Transmission

Transmission Type
Planetary – Powershift – ECPC
Travel Speeds: Forward – First
4.2 mph
Travel Speeds: Forward – Second
7.5 mph
Travel Speeds: Forward – Third
13.2 mph
Travel Speeds: Reverse – First
4.8 mph
Travel Speeds: Reverse – Second
8.5 mph
Travel Speeds: Reverse – Third
15 mph

Hydraulic System

Pump Flow at 2,111 rpm
23.5 gal/min
Main Relief Pressure
3190 psi
Maximum Supply Pressure
2930 psi
Lift Cylinder, Double-acting: Bore and Stroke
101.6 mm × 627 mm (4 in × 24.7 in)
Tilt Cylinder, Double-acting: Bore and Stroke
101.6 mm × 167 mm (4 in × 6.6 in)

Service Refill Capacities

Cooling System – Tier 4 Final/Stage IV
21.4 gal
Engine Crankcase
5.3 gal
Transmission
14.8 gal
Fuel Tank
132.1 gal
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV only)
4.2 gal
Differentials and Final Drives – Front
17.2 gal
Differentials and Final Drives – Rear
17.2 gal
Hydraulic Tank Only
19.8 gal
Cooling System – Tier 3/Stage IIIA equivalent
19.3 gal
Note
All non-road Tier 4 Final and Stage IV diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for

Brakes

Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released

Cab – Standard

Operator Sound Level (ISO 6396)
71 dB(A)
Machine Sound Level (ISO 6395) Tier 4/Stage IV
111 dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA equivalent
112 dB(A)

Cab – Suppression

Operator Sound Level (ISO 6396)
70 dB(A)
Machine Sound Level (ISO 6395) Tier 4/Stage IV
109 dB(A)
Machine Sound Level (ISO 6395) Tier 3/Stage IIIA equivalent
110 dB(A)

Hydraulic System – Steering

Steering System – Circuit
Closed Center Load Sensing
Bore
4.0 in
Stroke
23.5 in
Steering System – Pump
Piston – Variable Displacement
Maximum System Flow
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Steering Pressure Limited
4003 psi
Vehicle Articulation Angle
84 degrees

Dimensions (Approximate)

Height to Top of Beacon
12.95 ft
Height to Top of Exhaust Pipe
10.97 ft
Height to Top of Hood
8.42 ft
Ground Clearance to Bumper
2.18 ft
Center Line of Rear Axle to Bumper
6.53 ft
Hitch to Center Line of Front Axle
5.50 ft
Wheelbase
10.99 ft
Length with Blade on Ground
23.48 ft
Ground Clearance
1.23 ft
Width over Wheels
10.64 ft
Height to Top of Cab Roof
11.98 ft
Turning Radius – Inside of Push Arms
8.27 ft
  • POWER TRAIN
    • Advanced Productivity Electronic Control System (APECS)
    • Air to air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (Tier 4 Final/Stage IV only)
    • Electro-hydraulic parking brake
    • Electronic Clutch Pressure Control (ECPC)
    • Engine, Cat C7.1 with ACERT Technology (configured for two emissions options): – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
    • Engine driven cooling fan – suction
    • Fuel priming pump (electric)
    • Fuel to air cooler
    • Ground level engine shutoff
    • Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
    • Radiator, unit core
    • Starting aid (ether)
    • Throttle lock
    • Torque converter
    • Transmission, planetary, with 3F/3R speed range control
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free
    • Electrical system, 24V
    • Ground level lockable master disconnect switch
    • Lights, directional (rear)
    • Light, warning switched (LED strobe)
    • Lighting system, (front and rear)
    • Starter, electric
    • Starting receptacle for emergency start
  • OPERATOR ENVIRONMENT
    • 12V power port for mobile phone or laptop connection
    • AccuGrade mapping (ready)
    • Air conditioner
    • Cab, sound-suppressed pressurized
    • Cab door, sliding window (LH)
    • Cat Compaction Control (ready)
    • Cat Detect: Object Detection (ready)
    • Coat and hard hat hooks
    • Finger tip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Hydraulic controls – seat mounted
    • Implement hydraulic lockout
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Mirror, internal (panoramic)
    • Mirrors, rearview (externally mounted)
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
    • Seat, Cat Comfort (cloth) air suspension
    • Seat belt with minder, retractable, 76 mm (3 in) wide
    • STIC control system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
    • Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
  • TIRES, RIMS AND WHEELS
    • Wheels, tamping foot
  • GUARDS
    • Cleaner bars with teeth
    • Guards, crankcase and power train
    • Guard, driveshaft
  • FLUIDS
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • OTHER STANDARD EQUIPMENT
    • DEF tank fill gauge
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Emergency platform egress
    • Fire suppression ready
    • Fuel tank, 500 L (132.1 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, engine, and transmission oil coolers
    • Oil change system, high speed
    • Oil sampling valves
    • Steering, load sensing
    • Total hydraulic filtration system
    • Vandalism protection caplocks
    • Venturi stack
  • STANDARD ATTACHMENTS – HYDRAULICS
    • Hydraulics: – Standard or EU and Canada
  • STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
    • Glass (window): – Standard bonded or rubber-mounted glass
    • Precleaner – cab: – Standard or powered
    • Seat – cab: – Standard or heated and ventilated
    • Mirrors – cab: – Standard or heated
  • STANDARD ATTACHMENTS – POWER TRAIN
    • Axles: – Standard or non-spin rear
  • STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
    • Engine Precleaners: – Turbine or dual stage
  • STANDARD ATTACHMENTS – ELECTRICAL
    • Lights: – Standard or LED
  • STANDARD ATTACHMENTS – FUEL SYSTEMS
    • Fuel tank: – Non-fast or fast fill
  • STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
    • Product Link: – GSM, satellite
  • STANDARD ATTACHMENTS – CLEANER BARS
    • Cleaner bars: – Standard or abrasive
  • STANDARD ATTACHMENTS – BLADES
    • Blades: – Straight or tilt-straight
  • OPERATOR ENVIRONMENT
    • Camera, rear vision
    • Radio, AM/FM/AUX/USB/BLUETOOTH
    • Radio, CB (ready)
  • TECHNOLOGY PRODUCTS
    • Compaction control, basic
  • OTHER ATTACHMENTS
    • Sound suppression (required for Brazil)
  • FLUIDS
    • Antifreeze, –50° C (–58° F)
  • STARTING AIDS
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • MISCELLANEOUS
    • Film (ANSI) (Tier 4 Final/Stage IV only)
    • EU certification (Tier 4 Final/Stage IV only)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.