Engine

Engine Model
Cat® C13 ACERT™
Engine Model
Cat® C13 ACERT™
Bore
5.1 in
Bore
5.1 in
Stroke
6.2 in
Stroke
6.2 in
Displacement
762.8 in3
Displacement
762.8 in³
Gross Power – SAE J1995
375 hp
Net Power – SAE J1349
367 hp
Net Power – ISO 14396
370 hp
No Engine De-rating Below
12500 ft
Peak Engine Torque Net (SAE J1349)
1564 lbf-ft
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat C13 ACERT
Peak Engine Torque Gross (SAE J1995)
1579 ft·lbf
Peak Engine Torque Speed
1200 r/min
Gross Power - SAE J1995
375 mm H2O
Net Power - ISO 14396
370 mm H2O
Net Power - SAE J1349
367 mm H2O
No Engine De-rating Below
12500 ft
Peak Engine Torque Net (SAE J1349)
1564 ft·lbf
Note
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4.
Note
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Emissions
The 730C2 EJ meets Tier 4 Final/Stage IV emission standards.
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
Emissions
The 730C2 EJ meets Tier 4 Final/Stage IV emission standards.
Note (1)
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4.
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

Rated Payload
31 t

Body Capacities

Heaped (SAE 2:1)
22.1 yd³
Struck
17.7 yd³

Transmission

Forward 1
5 mph
Forward - 1
5 mile/h
Forward 2
9 mph
Forward - 2
9 mile/h
Forward 3
14 mph
Forward - 3
14 mile/h
Forward 4
21 mph
Forward - 4
21 mile/h
Forward 5
29 mph
Forward - 5
29 mile/h
Forward 6
34 mph
Forward - 6
34 mile/h
Reverse - 1
6 mile/h

Sound Levels

Interior Cab
76 dB(A)
Note
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with th
Note
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with th
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Front Axle - Empty
34535 lb
Center Axle - Empty
12103 lb
Rear Axle - Empty
11552 lb
Total - Empty
58190 lb
Front Axle - Rated Load
7231 lb
Center Axle - Rated Load
27249 lb
Rear Axle - Rated Load
27249 lb
Total - Rated Load
61729 lb
Front Axle - Loaded
36013 lb
Center Axle - Loaded
42362 lb
Rear Axle - Loaded
41811 lb
Total - Loaded
120186 lb

Service Refill Capacities

Fuel Tank
108.8 gal
Fuel Tank
108.8 gal (US)
Cooling System
21.9 gal
Cooling System
21.9 gal (US)
Hydraulic System
29.1 gal (US)
Engine Crankcase
10 gal (US)
Transmission
12.4 gal (US)
Final Drives/Differential
33 gal (US)
Output Transfer Gear Box
6.3 gal (US)
DEF Tank
5.2 gal
DEF Tank
5.2 gal (US)

Body Eject

Eject Time
12 s
Retract Time
15 s

Steering

Lock to Lock
4.75 seconds @ 60 rpm

Standards

Brakes
ISO 3450 – 2011
Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007
Steering
ISO 5010 – 2007

Body Plate

Type
High strength Brinell HB450 wear resistant steel
Type
High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions: Steer Angle – Left/Right
45°
Note
Dimensions are for machines equipped with 750/65 tires.
Turning Dimensions - Aisle Width
210 in
Turning Dimensions - Clearance Radius
318 in
Turning Dimensions - Inside Radius
153 in
Turning Dimensions - SAE Turning Radius
294 in
Turning Dimensions - Steer Angle - Left/Right
45°
  • Dashboard Liquid Crystal Display (LCD)
    • Alert indicator, selected gear and direction, speed or auto shift, review Operation and Maintenance Manual (OMM), primary steering failure, seat belt warning, secondary steering failure, Machine Security System (MSS), secondary steering energy source enga
  • Machine Operation Monitoring System includes
    • Action lamp, engine oil pressure, primary steering system, left turn signal, high beam, coolant temperature, tachometer, parking brake, fuel level, right turn signal, transmission oil temperature, brake system, transmission hold, hoist control, hydraulic
Get in touch Your Nearest Location
[contact-form-7 404 "Not Found"]
Two dads havin' fun.
Splishin' & splashin' in the hot summer sun.